Free Click & Collect
Within One Hour
Delivery address
Collection branch
Ideas & Advice
VAT
EX
INC
Sovereign 30616230 CDM3 Lath Mesh Membrane Roll 1.5M x 10M
Hover Over to Zoom In
Frequently bought together
Overview
- Provides a fast track application to wall and floor areas
- Can be plastered directly using Sovereign Whitewall or can be dry lined using the dot and dab method
- Low profile (3mm), meaning minimal loss of space
Technical specification
Size
1.5m x 10m
Length
10m
Thickness
0.5mm
Width
1.5m
Material
HDPE (High Density Polyethylene)
Colour
Translucent
Coverage
14m²
Drying Time
Instant
Pack Quantity
1
Certifications Met
BBA Approved
Type
Cavity Drainage Membrane
Brand Name
Sovereign
Reviews
Be the first to review this product.
Safeguard Drybase Flex Membrane 1.2 X 15 M
A watertight low-profile sheet membrane for protection against dampness in walls without the need to drill and install plugs. The membrane is a 1.5 mm thick flexible polypropylene sheet with a fleeced surface on both sides. The two fleeces ensure good adhesion to the wall by means of Drybase Flex Adhesive, as well as the direct application of plaster to the face.
£166.02 each (Inc. VAT)
Safeguard Drybase Plaster Membrane 2m X 20m
Drybase Plaster Mesh Membrane LP is produced using high-quality Polypropylene material and provides a barrier to moisture, salts and vapour. It is a slimline membrane with 2.5mm studs on the rear that enables the management of moisture without significantly reducing room space. A plastic mesh is welded to the front surface of the membrane, allowing it to accept plaster coats via standard trowel application or as a base for dot and dab plasterboard application.
£488.51 each (Inc. VAT)
Sovereign 30806099 CDM Lath Plug 8mm x 50mm Pack 250
Sovereign CDM8 Membrane Lath Plugs are manufactured from polypropylene, giving a corrosion resistant fixing. They are intended for use in damp proofing and waterproofing applications, to secure SovDrain lath membranes to the substrate, as part of the SovDrain waterproofing system.
£0.14 each (Inc. VAT)
Sovereign 30806097 CDM Plugs 10mm x 55mm Pack 100
Sovereign Membrane Plugs are manufactured from glass filled polyamide, giving a high strength and corrosion resistant fixing. They are intended for use in damp proofing and waterproofing applications, to secure SovDrain membranes to the substrate, as part of the SovDrain waterproofing system. The plugs must be sealed using SovDrain Sealing Rope to the underside of the plug head in all below ground applications. Sovereign CDM8 plugs can be used in above ground situations, which includes a rubber sealing washer already installed onto the plug.
£72.00 each (Inc. VAT)