Dryrod Damp-Proofing Rods Next Generation DPC - The most effective form of damp proofing for walls; outperforms creams, gels or liquids. BBA approved.
Fast & Simple to Install DIY rising damp treatment. Less messy than older traditional damp course injection creams or liquids
No specialist equipment required - simply insert into 12mm holes in the mortar lines of a building to form a powerful waterproof barrier
Exact Dosage - Delivers the correct dose every time eliminating guesswork.
BBA Approved The High-Performance DPC Treatment is Certified by the British Board of Agriment to be effective against the ingress of moisture for at least 20 years
Effective in both new (alkaline) and old (neutral) mortar.
A watertight low-profile sheet membrane for protection against dampness in walls without the need to drill and install plugs. The membrane is a 1.5 mm thick flexible polypropylene sheet with a fleeced surface on both sides. The two fleeces ensure good adhesion to the wall by means of Drybase Flex Adhesive, as well as the direct application of plaster to the face.
Size
1.2 × 15 m
Length
15 m
Thickness
1.5 mm
Width
1.2 m
Weight
9.6
Material
Fleece
Colour
Black
Coverage
1 × 15 m
Pack Quantity
1
Certifications Met
ISO 9001, ISO 14001, Fire Rating: Class F (EN 13501)
The Drybase Plaster Membrane Kit is an easy-to-use way to prepare damp walls for replastering with traditional plasters or plasterboards. It is the ideal solution for high-speed damp-proof replastering jobs. This kit comes with all the equipment you need to replaster 10 m2 of wall.
IKO Hyload Original Damp-proof Course system is a flexible polymeric sheet material, used within masonry walls to prevent passage of moisture from the ground and at all levels as cavity tray to prevent the downward movement of water.Trusted for over 40 years, Hyload Original is the UK’s leading High Performance DPC
A watertight low-profile sheet membrane for protection against dampness in walls without the need to drill and install plugs. The membrane is a 1.5 mm thick flexible polypropylene sheet with a fleeced surface on both sides. The two fleeces ensure good adhesion to the wall by means of Drybase Flex Adhesive, as well as the direct application of plaster to the face.
The Drybase Plaster Membrane Kit is an easy-to-use way to prepare damp walls for replastering with traditional plasters or plasterboards. It is the ideal solution for high-speed damp-proof replastering jobs. This kit comes with all the equipment you need to replaster 10 m2 of wall.
IKO Hyload Original Damp-proof Course system is a flexible polymeric sheet material, used within masonry walls to prevent passage of moisture from the ground and at all levels as cavity tray to prevent the downward movement of water.Trusted for over 40 years, Hyload Original is the UK’s leading High Performance DPC