Sovereign CDM3 Lath/Mesh Membrane provides a robust drainage membrane suitable for use above and below ground on walls, floors and arched/vaulted ceilings, as part of the SovDrain waterproofing system. This membrane has a low stud profile (3mm), thus minimising wall and floor level changes.
Sovereign CDM8 Rapid Seal Plugs and Washers are manufactured from polypropylene giving a corrosion resistant fixing. The two-piece plug comprises of an expansion pin and fixing body for fixing through insulation into a solid substrate and into COB wall construction, as part of the SovDrain waterproofing system.
Sovereign SovDrain CDM 20 is a high performance cavity drainage system membrane. It provides a robust drainage membrane suitable for use on floors, as part of the SovDrain Waterproofing system. SovDrain CDM 20 is easily cut to shape/size using a knife or scissors. This membrane is typically finished with either a Sovereign SBR Bonding Agent modified screed (minimum 65mm) or a floating floor.
Celcon Block Standard Grade is BBA certified and has a compressive strength of 3.6N/mm2. Its all-round performance allows a 100mm Standard Grade Celcon Block to be used consistently throughout a build, eliminating on-site confusion
Sovereign CDM3 Lath/Mesh Membrane provides a robust drainage membrane suitable for use above and below ground on walls, floors and arched/vaulted ceilings, as part of the SovDrain waterproofing system. This membrane has a low stud profile (3mm), thus minimising wall and floor level changes.
Sovereign CDM8 Rapid Seal Plugs and Washers are manufactured from polypropylene giving a corrosion resistant fixing. The two-piece plug comprises of an expansion pin and fixing body for fixing through insulation into a solid substrate and into COB wall construction, as part of the SovDrain waterproofing system.
Sovereign SovDrain CDM 20 is a high performance cavity drainage system membrane. It provides a robust drainage membrane suitable for use on floors, as part of the SovDrain Waterproofing system. SovDrain CDM 20 is easily cut to shape/size using a knife or scissors. This membrane is typically finished with either a Sovereign SBR Bonding Agent modified screed (minimum 65mm) or a floating floor.
Celcon Block Standard Grade is BBA certified and has a compressive strength of 3.6N/mm2. Its all-round performance allows a 100mm Standard Grade Celcon Block to be used consistently throughout a build, eliminating on-site confusion