Proven long-term UV resistance (5000h test acc. to EN 13859-2), validated by continuous testing
Suitable for open or ventilated cladding in timber, metal, stone and other materials, with open joints of up to 3cm
15-year product warranty for joint width of up to 3cm
Wind-tight, water-tight but vapour-open
Extremely lightweight, flexible and easy to install
Can be left uncovered for up to 4 months while retaining full performance warranty
BBA certificate 90/2548
Environmental Product Declaration can be downloaded here: https://www.dupont.co.uk/content/dam/dupont/amer/us/en/performance-building-solutions/public/documents/en/EPD-Tyvek-2524B.pdf
Sovereign CDM8 Membrane Lath Plugs are manufactured from polypropylene, giving a corrosion resistant fixing. They are intended for use in damp proofing and waterproofing applications, to secure SovDrain lath membranes to the substrate, as part of the SovDrain waterproofing system.
Sovereign Membrane Plugs are manufactured from glass filled polyamide, giving a high strength and corrosion resistant fixing. They are intended for use in damp proofing and waterproofing applications, to secure SovDrain membranes to the substrate, as part of the SovDrain waterproofing system. The plugs must be sealed using SovDrain Sealing Rope to the underside of the plug head in all below ground applications. Sovereign CDM8 plugs can be used in above ground situations, which includes a rubber sealing washer already installed onto the plug.
Sovereign CDM8 Rapid Seal Plugs and Washers are manufactured from polypropylene giving a corrosion resistant fixing. The two-piece plug comprises of an expansion pin and fixing body for fixing through insulation into a solid substrate and into COB wall construction, as part of the SovDrain waterproofing system.
Sovereign Fleeced Overseal Tape is a synthetic butyl/rubber based preformed strip sealant laminated with a non woven polyester fleece. It's primarily used for creating a joint overseal where SovDrain Cavity Drain Membranes are used.
Size
2mm x 100mm x 10m
Length
10m
Thickness
2mm ± 0.2mm
Width
100mm
Material
Synthetic Butyl/Rubber Sealant Laminated with Non-woven Polyester Fleece
Sovereign CDM8 Membrane Lath Plugs are manufactured from polypropylene, giving a corrosion resistant fixing. They are intended for use in damp proofing and waterproofing applications, to secure SovDrain lath membranes to the substrate, as part of the SovDrain waterproofing system.
Sovereign Membrane Plugs are manufactured from glass filled polyamide, giving a high strength and corrosion resistant fixing. They are intended for use in damp proofing and waterproofing applications, to secure SovDrain membranes to the substrate, as part of the SovDrain waterproofing system. The plugs must be sealed using SovDrain Sealing Rope to the underside of the plug head in all below ground applications. Sovereign CDM8 plugs can be used in above ground situations, which includes a rubber sealing washer already installed onto the plug.
Sovereign CDM8 Rapid Seal Plugs and Washers are manufactured from polypropylene giving a corrosion resistant fixing. The two-piece plug comprises of an expansion pin and fixing body for fixing through insulation into a solid substrate and into COB wall construction, as part of the SovDrain waterproofing system.
Sovereign Fleeced Overseal Tape is a synthetic butyl/rubber based preformed strip sealant laminated with a non woven polyester fleece. It's primarily used for creating a joint overseal where SovDrain Cavity Drain Membranes are used.