Free Click & Collect
Within One Hour
Delivery address
Collection branch
Ideas & Advice
VAT
EX
INC
Wykamol CMPLASTERPLUG100 Plaster Plugs with Seals White Pack 100
Hover Over to Zoom In
Frequently bought together
Overview
- Wykamol CM Plaster Plugs are used for the application of Wykamol Mesh membrane Systems.
- A reinforced head to prevent damage when knocking in the plug.
- Tailor made seal specific to each plug
- Large serrated heads (35mm brick plug or 50mm plaster plugs) provides optimum surface area and adhesion to finishes
Technical specification
Country Origin
GB
Brand Name
Wykamol
Reviews
Be the first to review this product.
Safeguard Drybase Plaster Membrane 2m X 20m
Drybase Plaster Mesh Membrane LP is produced using high-quality Polypropylene material and provides a barrier to moisture, salts and vapour. It is a slimline membrane with 2.5mm studs on the rear that enables the management of moisture without significantly reducing room space. A plastic mesh is welded to the front surface of the membrane, allowing it to accept plaster coats via standard trowel application or as a base for dot and dab plasterboard application.
£488.51 each (Inc. VAT)
Sovereign 30806097 CDM Plugs 10mm x 55mm Pack 100
Sovereign Membrane Plugs are manufactured from glass filled polyamide, giving a high strength and corrosion resistant fixing. They are intended for use in damp proofing and waterproofing applications, to secure SovDrain membranes to the substrate, as part of the SovDrain waterproofing system. The plugs must be sealed using SovDrain Sealing Rope to the underside of the plug head in all below ground applications. Sovereign CDM8 plugs can be used in above ground situations, which includes a rubber sealing washer already installed onto the plug.
£7,653.60 each (Inc. VAT)
Sovereign 30806099 CDM Lath Plug 8mm x 50mm Pack 250
Sovereign CDM8 Membrane Lath Plugs are manufactured from polypropylene, giving a corrosion resistant fixing. They are intended for use in damp proofing and waterproofing applications, to secure SovDrain lath membranes to the substrate, as part of the SovDrain waterproofing system.
£38.52 each (Inc. VAT)
Sovereign 30806090 CDM8 Membrane Roll 2.4M x 20M
Sovereign CDM8 membrane provides a robust drainage membrane suitable for above and below ground applications to walls and floors as part of the SovDrain waterproofing system. With a fast track application, the membrane protects new finishes from the effects of dampness and/or salt contamination in above ground situations, and prevents water ingress below ground in areas such as cellars, basements, vaults, and tunnels. This membrane has a relatively low stud profile (8mm), thus minimising wall and floor level changes. The CDM8 membrane is typically finished with either a pre-treated timber stud partition wall and plasterboard or independent stud metal frame system. The floors can be finished with a Sovereign SBR modified screed (minimum 65mm) or a floating floor.
£365.94 each (Inc. VAT)