Delivery address
Collection branch

Wykamol CMPLASTERPLUG100 Plaster Plugs White No Seals 100PC

298703
Wykamol CMPLASTERPLUG100 Plaster Plugs White No Seals 100PC
Wykamol CMPLASTERPLUG100 Plaster Plugs White No Seals 100PC
Hover Over to Zoom In

Frequently bought together

Overview

  • Wykamol CM Plaster Plugs are used for the application of Wykamol Mesh membrane Systems.
  • A reinforced head to prevent damage when knocking in the plug.
  • Tailor made seal specific to each plug
  • Large serrated heads (35mm brick plug or 50mm plaster plugs) provides optimum surface area and adhesion to finishes

Technical specification

Country Origin
GB
Brand Name
Wykamol

Reviews

Be the first to review this product.
Retail price

£20.39

each
£16.99 ex. vat
UNLOCK TRADE PRICE
Access Trade Price
Enter postcode for local availability
Select collection branch for local availability
Please enter your delivery postcode...
Please select your collection branch...

Related products

Drybase Plaster Mesh Membrane LP is produced using high-quality Polypropylene material and provides a barrier to moisture, salts and vapour. It is a slimline membrane with 2.5mm studs on the rear that enables the management of moisture without significantly reducing room space. A plastic mesh is welded to the front surface of the membrane, allowing it to accept plaster coats via standard trowel application or as a base for dot and dab plasterboard application.
Size
40m
Interior or Exterior Use
Interior
Drying Time
N/A
VOC Level
Minimal 0-0.29%
Colour
Green
Type
Plaster Membrane
Manufacturer Model No
CM-T PLASTER MEMBRANE 2X20
Brand Name
Safeguard

£488.51

each (Inc. VAT)
Loading...
Loading...
Drybase Liquid-Applied DPM is a single-pack barrier coating for above ground use. It is supplied ready to use. It is available in black or white with a consistency similar to that of thick emulsion paint. The product is applied in two coats. Drybase Liquid-Applied DPM Is suitable for use on solid floors, embedded timbers and walls. Once applied, the product cures to form a membrane that is flexible and elastic. Drybase Liquid-Applied DPM is water- based and can be applied to damp substrates by brush, roller, or spray. The applied product is typically touch-dry in one hour.
Size
1 Litre
Interior or Exterior Use
Interior
Coverage per Litre
4.5 m2 per 5 litres for vapour barrier, 7 – 9 m2 per 5 litres for general DPM
Drying Time
1 hour
Time to Full Cure
24 hours
VOC Level
Minimal 0-0.29%
Colour
White
Type
Damp-Proof Membrane
Manufacturer Model No
TK-DRYBASE WHITE 1L
Brand Name
Safeguard

£35.42

each (Inc. VAT)
Loading...
Loading...
Sovereign Membrane Plugs are manufactured from glass filled polyamide, giving a high strength and corrosion resistant fixing. They are intended for use in damp proofing and waterproofing applications, to secure SovDrain membranes to the substrate, as part of the SovDrain waterproofing system. The plugs must be sealed using SovDrain Sealing Rope to the underside of the plug head in all below ground applications.
Brand Name
Sovereign
Colour
Translucent
Pack Quantity
100
Certifications Met
None
Type
CDM Plug Washers

£2,311.20

each (Inc. VAT)
Loading...
Loading...
Sovereign CDM3 Lath/Mesh Membrane provides a robust drainage membrane suitable for use above and below ground on walls, floors and arched/vaulted ceilings, as part of the SovDrain waterproofing system. This membrane has a low stud profile (3mm), thus minimising wall and floor level changes.
Size
1.5m x 10m
Length
10m
Thickness
0.5mm
Width
1.5m
Material
HDPE (High Density Polyethylene)
Colour
Translucent
Coverage
14m²
Drying Time
Instant
Pack Quantity
1
Certifications Met
BBA Approved
Type
Cavity Drainage Membrane
Brand Name
Sovereign

£167.45

each (Inc. VAT)
Loading...
Loading...
Safeguard Drybase Plaster Membrane 2m X 20m
Safeguard Drybase Plaster Membrane 2m X 20m
Drybase Plaster Mesh Membrane LP is produced using high-quality Polypropylene material and provides a barrier to moisture, salts and vapour. It is a slimline membrane with 2.5mm studs on the rear that enables the management of moisture without significantly reducing room space. A plastic mesh is welded to the front surface of the membrane, allowing it to accept plaster coats via standard trowel application or as a base for dot and dab plasterboard application.
£488.51 each (Inc. VAT)
Safeguard Drybase Liquid Damp-proof Membrane 1L White
Safeguard Drybase Liquid Damp-proof Membrane 1L White
Drybase Liquid-Applied DPM is a single-pack barrier coating for above ground use. It is supplied ready to use. It is available in black or white with a consistency similar to that of thick emulsion paint. The product is applied in two coats. Drybase Liquid-Applied DPM Is suitable for use on solid floors, embedded timbers and walls. Once applied, the product cures to form a membrane that is flexible and elastic. Drybase Liquid-Applied DPM is water- based and can be applied to damp substrates by brush, roller, or spray. The applied product is typically touch-dry in one hour.
£35.42 each (Inc. VAT)
Sovereign 30806093 CDM Plug Washers Pack 100
Sovereign 30806093 CDM Plug Washers Pack 100
Sovereign Membrane Plugs are manufactured from glass filled polyamide, giving a high strength and corrosion resistant fixing. They are intended for use in damp proofing and waterproofing applications, to secure SovDrain membranes to the substrate, as part of the SovDrain waterproofing system. The plugs must be sealed using SovDrain Sealing Rope to the underside of the plug head in all below ground applications.
£2,311.20 each (Inc. VAT)
Sovereign 30616230 CDM3 Lath Mesh Membrane Roll 1.5M x 10M
Sovereign 30616230 CDM3 Lath Mesh Membrane Roll 1.5M x 10M
Sovereign CDM3 Lath/Mesh Membrane provides a robust drainage membrane suitable for use above and below ground on walls, floors and arched/vaulted ceilings, as part of the SovDrain waterproofing system. This membrane has a low stud profile (3mm), thus minimising wall and floor level changes.
£167.45 each (Inc. VAT)