Ascot scroll patterned metal decking or garden fence infill panel, designed for installation between upper and lower timber frames (frame not included). Ideal for around the decking. Each panel measures 770mm high x 280mm wide, supplied in packs of 2 (560mm run). Made of solid, electro-galvanised steel with black powder coating for rust resistance. Features 16mm x 6mm flat top and base rails with pre-drilled screw holes (screws not included). Infill bars are 10mm in diameter; scrollwork measures 10mm x 3mm.
Height
70 mm
Length
770 mm
Width
280 mm
Weight
7 kg
Material
Steel
Colour
Black
Finish
Electro galvanised, rust resistance and powder coated
Creocote is an oil based wood treatment. Formulated to be effective when applied to exterior timbers such as garden sheds, fences and trellis work, improving surface water repellency to restrict weather damage.
Ronseal One Coat Fence Life gives colour and protection to rough sawn sheds and fences for up to two years, in just one coat.
Make sure it's a warm, dry day, above 10°C and the wood is clean and dry. Cold, wet weather stops the stain from drying. Use a stiff brush to get rid of any dirt.
You can either brush or spray your stain. When brushing, get lots of stain on your brush and apply a thick coat to your wood but don’t spread it too far. After one hours, it will be 100% showerproof. It takes 4 hours to dry fully. If your wood is weathered, you may need to apply a second coat. After the first coat has dried, review it to see if you need a second one. When spraying, pour the liquid into the tank. Pump it up or turn it on and start spraying. Use long, sweeping, horizontal arm movements for an even finish. Move along the full width of the fence panel, drop down and repeat the process. Overlap each pass by 50% for even coverage.
Wavy metal decking or garden fence infill panel, fix between upper and lower timber frames (not included). Ideal for around decking. Each panel: 770mm x 280mm; pack of 2 (560mm run). Solid galvanised steel, powder-coated greyish silver. Features 16mm x 6mm flat top and base rails with pre-drilled screw holes (screws not included). Infill bars: 10mm diameter.
Ascot scroll patterned metal decking or garden fence infill panel, designed for installation between upper and lower timber frames (frame not included). Ideal for around the decking. Each panel measures 770mm high x 280mm wide, supplied in packs of 2 (560mm run). Made of solid, electro-galvanised steel with black powder coating for rust resistance. Features 16mm x 6mm flat top and base rails with pre-drilled screw holes (screws not included). Infill bars are 10mm in diameter; scrollwork measures 10mm x 3mm.
Creocote is an oil based wood treatment. Formulated to be effective when applied to exterior timbers such as garden sheds, fences and trellis work, improving surface water repellency to restrict weather damage.
Ronseal One Coat Fence Life gives colour and protection to rough sawn sheds and fences for up to two years, in just one coat.
Make sure it's a warm, dry day, above 10°C and the wood is clean and dry. Cold, wet weather stops the stain from drying. Use a stiff brush to get rid of any dirt.
You can either brush or spray your stain. When brushing, get lots of stain on your brush and apply a thick coat to your wood but don’t spread it too far. After one hours, it will be 100% showerproof. It takes 4 hours to dry fully. If your wood is weathered, you may need to apply a second coat. After the first coat has dried, review it to see if you need a second one. When spraying, pour the liquid into the tank. Pump it up or turn it on and start spraying. Use long, sweeping, horizontal arm movements for an even finish. Move along the full width of the fence panel, drop down and repeat the process. Overlap each pass by 50% for even coverage.
Wavy metal decking or garden fence infill panel, fix between upper and lower timber frames (not included). Ideal for around decking. Each panel: 770mm x 280mm; pack of 2 (560mm run). Solid galvanised steel, powder-coated greyish silver. Features 16mm x 6mm flat top and base rails with pre-drilled screw holes (screws not included). Infill bars: 10mm diameter.