Ronseal Trade Polyurethane Varnish is a traditional solvent based varnish that provides tough protection against knocks, scuffs and scratches.
Ensure the room is warm and well-ventilated. Sand the wood in the direction of the grain using 120 grit paper. Wear a suitable mask to avoid the inhalation of dust. Wipe away dust with white spirit and allow to dry. Always use a good quality, soft bristle brush. Stir the varnish thoroughly. Apply 3 coats leaving 6 hours between coats. Lightly sand with 240 grit paper and remove dust prior to application of the final coat.
Size
0.75 L
Suitable for
Suitable for providing tough protection against knocks, scuffs and scratches.
ProSolve PVSMG7A Site Marker Aerosol, 750ml, Green. The ProSolve Site Marker is an economical and multifunctional aerosol-based line marking paint. Its rapid-drying, high-resistance formulation (formulated without lead and xylene) is suitable for precise marking on diverse substrates such as concrete, tarmac, timber, and composite materials.
A smooth masonry paint specially formulated for the professional user, which provides a quality protective and decorative finish. It can be applied to most correctly prepared sound exterior masonry surfaces including rendering (stucco) roughcast, pebbledash and tyrolean; building blocks, concrete and facing bricks, exterior cement-based boards.
Colour Family
Creams
Colour
Magnolia
Finish
Smooth
Size
10 L
Application Method
Brush, Roller or Spray
Interior or Exterior Use
Exterior
Coverage per Litre
up to 7 m² per litre
Drying Time
1 - 2 (Touch Dry) hrs 3 - 5 (Recoat) hrs
Drying time between coats
3 - 5 hrs
Clean equipment with
Water
Suitable for
Use on most exterior masonry surfaces and exterior grade building boards.
The ultimate primer, sealer and stain killer. It offers unparalleled adhesion on any surface without sanding and has the hiding power to conceal the toughest of stains. Permanently blocks odours. Dries in minutes.
Ronseal Trade Polyurethane Varnish is a traditional solvent based varnish that provides tough protection against knocks, scuffs and scratches.
Ensure the room is warm and well-ventilated. Sand the wood in the direction of the grain using 120 grit paper. Wear a suitable mask to avoid the inhalation of dust. Wipe away dust with white spirit and allow to dry. Always use a good quality, soft bristle brush. Stir the varnish thoroughly. Apply 3 coats leaving 6 hours between coats. Lightly sand with 240 grit paper and remove dust prior to application of the final coat.
ProSolve PVSMG7A Site Marker Aerosol, 750ml, Green. The ProSolve Site Marker is an economical and multifunctional aerosol-based line marking paint. Its rapid-drying, high-resistance formulation (formulated without lead and xylene) is suitable for precise marking on diverse substrates such as concrete, tarmac, timber, and composite materials.
A smooth masonry paint specially formulated for the professional user, which provides a quality protective and decorative finish. It can be applied to most correctly prepared sound exterior masonry surfaces including rendering (stucco) roughcast, pebbledash and tyrolean; building blocks, concrete and facing bricks, exterior cement-based boards.
The ultimate primer, sealer and stain killer. It offers unparalleled adhesion on any surface without sanding and has the hiding power to conceal the toughest of stains. Permanently blocks odours. Dries in minutes.