Free Click & Collect
Within One Hour
Delivery address
Collection branch
Ideas & Advice
VAT
EX
INC
Hover Over to Zoom In
Frequently bought together
Overview
- Kitemarked - Suitable for domestic gas installations
- WRAS Approved - Suitable for hot & cold water systems
- 25 Year Guarantee
- Manufactured to EN1254-2
- Smooth lines - Minimal flow restriction
- Cost effective installation
- Manufactured with grade A copper
- 100% Recyclable
- Low corrosion
- Neat design for easy installation
Technical specification
Suitable for
Gas & Water
Diameter
22 mm
Connection Type
End Feed
Material
Copper
Years Guaranteed
3
Type
End Feed Coupling
Brand Name
No Brand
Made To Order
N
Reviews
Be the first to review this product.
Flowflex Compression 90° Equal Elbow 22mm
Compression Elbow 22mm fittings can used on a wide range of applications including central heating and hot & cold water supplies
£6.20 each (Inc. VAT)
JG Speedfit straight connector 22mm
Speedfit push-fit plastic fitting for the connection of plastic and cooper pipe. Simply push the fitting onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fitting methods. Note; with all plastic pipes the relevant manufacturer’s pipe insert is required. Designed, manufactured and assembled in the UK by John Guest Speedfit.
£3.89 each (Inc. VAT)
JG Speedfit female tap connector 22mm x 3/4inch
Speedfit push-fit fitting for the connection of plastic and copper pipe to a male thread appliance. The female coupler is ideal for the connection of taps and toilets. In comparison to other installation methods available no tools are required with this hand-tightened connection. Simply push the fitting fully onto the pipe and hand turn onto the thread. Should the need arise to demount the connection push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods. Note: with all plastic pipes the relevant manufacturer’s pipe insert is required. Designed, manufactured and assembled in the UK by John Guest Speedfit.
£4.81 each (Inc. VAT)
End Feed Straight Coupling 28mm
Endfeed Straight Coupling 28mm fittings are suitable for use on a wide variety of applications, including central heating and hot & cold water supplies
£1.55 each (Inc. VAT)