The Proguard Eazi-Zip door is ideal for creating a temporary doorway through polythene walling. Featuring a self-adhesive double zipper, the door affixes to any polythene screening to create a sealable opening. They are perfect for allowing easy access to a dust containment area.
The Eazi-Zip door can be installed in a matter of minutes by simply sticking the two zips side by side approximately 1 metre apart then use a knife to cut down the back of the screening material.
The doors are suitable for use with screening props and polythene sheeting to create a temporary screen (sold separately).
�
Tetrion All Purpose Filler is tough and water-resistant. Developed to be highly versatile, it can be used for either interior or exterior jobs. Tetrion seals, bonds and fills most household materials including, plaster, wood, stone, concrete, glass, metal and brickwork
Interior or Exterior Use
Interior/Exterior
Drying Time
24 Hours
Paintable
Only paint over the filler when completely dry, this takes a minimum of 24 hours
Mixes to a smooth, creamy consistency. Special binders give guaranteed adhesion and a fill which will not shrink or crack. It is the ideal versatile filler suitable for a variety of jobs, even large areas.
Proguard Dirt Trap Mats are the first-ever contamination control product containing renewable plant-based materials, providing an environmentally friendly alternative for socially responsible organizations.
Proguard dirt trap mats are tacky plastic�sheets that provide containment of dust and dirt�during fit-out�and refurbishment work. Each tacky mat contains 30 peel-away layers coated with a pressure-sensitive adhesive. The sheets help to protect from dirt and dust being transferred to non-working, clean areas, saving you clean-up time at the end of the project. Once the top layer becomes soiled this can be removed to leave a clean layer.
Each layer of the mat is fully coated with a particle grabbing adhesive and constructed of low-density polyethylene film. A low-profile numbered tab indicates the number of remaining layers and ensures one-Iayer-at-a-time removal. The tack mats will remove dirt and debris from foot and wheeled traffic. 20% of the material comes from a renewable plant-based material that reduces CO2 emissions.
These mats are designed for use with our Proguard Dirt Trap Mat Frames (PSMF1) or for use as stand-alone mats. Once the 30-layer mat on the Proguard Frame has been used, replace with a new Proguard mat (PSM2)
Ensure the floor to which the trap mat is to be applied is clean, dust free and dry. Remove the peel able layer on the underside. This will leave a tacky surface � fix this to the floor between the clean and working areas or onto the Proguard PSMF1 Frame. Ensure that the trap mat is stuck firmly in place.
Peel off the top layer which will leave a tacky surface which will remove dirt and debris from foot and wheeled traffic.
The Proguard Eazi-Zip door is ideal for creating a temporary doorway through polythene walling. Featuring a self-adhesive double zipper, the door affixes to any polythene screening to create a sealable opening. They are perfect for allowing easy access to a dust containment area.
The Eazi-Zip door can be installed in a matter of minutes by simply sticking the two zips side by side approximately 1 metre apart then use a knife to cut down the back of the screening material.
The doors are suitable for use with screening props and polythene sheeting to create a temporary screen (sold separately).
�
Tetrion All Purpose Filler is tough and water-resistant. Developed to be highly versatile, it can be used for either interior or exterior jobs. Tetrion seals, bonds and fills most household materials including, plaster, wood, stone, concrete, glass, metal and brickwork
Mixes to a smooth, creamy consistency. Special binders give guaranteed adhesion and a fill which will not shrink or crack. It is the ideal versatile filler suitable for a variety of jobs, even large areas.
Proguard Dirt Trap Mats are the first-ever contamination control product containing renewable plant-based materials, providing an environmentally friendly alternative for socially responsible organizations.
Proguard dirt trap mats are tacky plastic�sheets that provide containment of dust and dirt�during fit-out�and refurbishment work. Each tacky mat contains 30 peel-away layers coated with a pressure-sensitive adhesive. The sheets help to protect from dirt and dust being transferred to non-working, clean areas, saving you clean-up time at the end of the project. Once the top layer becomes soiled this can be removed to leave a clean layer.
Each layer of the mat is fully coated with a particle grabbing adhesive and constructed of low-density polyethylene film. A low-profile numbered tab indicates the number of remaining layers and ensures one-Iayer-at-a-time removal. The tack mats will remove dirt and debris from foot and wheeled traffic. 20% of the material comes from a renewable plant-based material that reduces CO2 emissions.
These mats are designed for use with our Proguard Dirt Trap Mat Frames (PSMF1) or for use as stand-alone mats. Once the 30-layer mat on the Proguard Frame has been used, replace with a new Proguard mat (PSM2)
Ensure the floor to which the trap mat is to be applied is clean, dust free and dry. Remove the peel able layer on the underside. This will leave a tacky surface � fix this to the floor between the clean and working areas or onto the Proguard PSMF1 Frame. Ensure that the trap mat is stuck firmly in place.
Peel off the top layer which will leave a tacky surface which will remove dirt and debris from foot and wheeled traffic.