Excellent product when used with caberfloor system. I've found it's much better to be very generous in application - at least two beads on the top of each joist and lots in tongue and groove - to ensure full adhesion, a stiff lattice and no future squeaking.
C-Tec 535105 BW1 Ultimate Tanking Solution: a single-component, primer-free system that creates a reliable, waterproof, and elastic barrier. Uses proprietary Tribrid® Technology for superior adhesion on various substrates. Ideal for floors and walls in showers, wet rooms, steam rooms, and saunas. Features antimicrobial agents to inhibit mould and fungi. Certified to ETAG 022 Annex E.
Suitable for
Waterproofing and tanking of bathrooms, wet
rooms, walk in showers, saunas and steam rooms
Ultracolor Plus grout can be used to enhance wall or floor tiled finishes both internally and externally with many added benefits such as anti-mould and water repellent features as well as being available in a wide range of colours. Suitable for use with almost all types of tile/mosaic. Not for use with metallic tiles or tiles with a soft glaze – if in doubt carry out a small trial area.
A multi-purpose wall and floor grout. High-performance, anti-efflorescence, quick-setting and drying polymermodified mortar with water-repellent DropEffect® and anti-mould BioBlock® technology for grouting joints 2 to 20 mm wide.
A solvent free acrylic emulsion adhesive which is designed to give a high bond strength, strong initial tack and a long open time. It is protected against biodegradation and is suitable for use over normal underfloor heating installations.
C-Tec 535105 BW1 Ultimate Tanking Solution: a single-component, primer-free system that creates a reliable, waterproof, and elastic barrier. Uses proprietary Tribrid® Technology for superior adhesion on various substrates. Ideal for floors and walls in showers, wet rooms, steam rooms, and saunas. Features antimicrobial agents to inhibit mould and fungi. Certified to ETAG 022 Annex E.
Ultracolor Plus grout can be used to enhance wall or floor tiled finishes both internally and externally with many added benefits such as anti-mould and water repellent features as well as being available in a wide range of colours. Suitable for use with almost all types of tile/mosaic. Not for use with metallic tiles or tiles with a soft glaze – if in doubt carry out a small trial area.
A multi-purpose wall and floor grout. High-performance, anti-efflorescence, quick-setting and drying polymermodified mortar with water-repellent DropEffect® and anti-mould BioBlock® technology for grouting joints 2 to 20 mm wide.
A solvent free acrylic emulsion adhesive which is designed to give a high bond strength, strong initial tack and a long open time. It is protected against biodegradation and is suitable for use over normal underfloor heating installations.