Pressed steel outer casing and a cast aluminium pump stand offer increased protection of the stainless steel and rubber base plate
A combination of a rubber pump chamber and a urethane vortex impeller enables the design to offer excellent wear resistance in site water applications that contain sand and silt in suspension, thus maintaining performance and reliability.
Integral swing check valve which will prevent backflow of water from the discharge hose
This sediment filter sack is a filtration system, accepted by the Environment Agency, that controls flows and cleanses the water of silt and sediment and can detect the presence of hydrocarbons
The BPS series, in thermoplastic, is designed for clean and slightly dirty water. The top discharge design makes them suitable for partial immersion applications and where space or access is restricted
The BPS series, in thermoplastic, is designed for clean and slightly dirty water. The top discharge design makes them suitable for partial immersion applications and where space or access is restricted
The Makita PF1110/2 is a 240 volt submersible pump with Stainless Steel body for dirty water. Maximum delivery of 250l/m and maximum solid diameter of 35mm.
This sediment filter sack is a filtration system, accepted by the Environment Agency, that controls flows and cleanses the water of silt and sediment and can detect the presence of hydrocarbons
The BPS series, in thermoplastic, is designed for clean and slightly dirty water. The top discharge design makes them suitable for partial immersion applications and where space or access is restricted
The BPS series, in thermoplastic, is designed for clean and slightly dirty water. The top discharge design makes them suitable for partial immersion applications and where space or access is restricted
The Makita PF1110/2 is a 240 volt submersible pump with Stainless Steel body for dirty water. Maximum delivery of 250l/m and maximum solid diameter of 35mm.