Drybase Plaster Mesh Membrane LP is produced using high-quality Polypropylene material and provides a barrier to moisture, salts and vapour. It is a slimline membrane with 2.5mm studs on the rear that enables the management of moisture without significantly reducing room space. A plastic mesh is welded to the front surface of the membrane, allowing it to accept plaster coats via standard trowel application or as a base for dot and dab plasterboard application.
Sovereign CDM8 membrane provides a robust drainage membrane suitable for above and below ground applications to walls and floors as part of the SovDrain waterproofing system. With a fast track application, the membrane protects new finishes from the effects of dampness and/or salt contamination in above ground situations, and prevents water ingress below ground in areas such as cellars, basements, vaults, and tunnels. This membrane has a relatively low stud profile (8mm), thus minimising wall and floor level changes. The CDM8 membrane is typically finished with either a pre-treated timber stud partition wall and plasterboard or independent stud metal frame system. The floors can be finished with a Sovereign SBR modified screed (minimum 65mm) or a floating floor.
Damplas Radon Gas Barrier is a high-quality, sustainable solution designed to protect buildings from the dangerous ingress of radon gas. Manufactured from a controlled blend of 100% recycled polythene, this membrane offers an eco-friendly yet robust defense for residential and commercial flooring constructions.
Beyond its primary function as a gas barrier, Damplas Radon also serves as a high-performance damp proof membrane (DPM), providing dual-layer protection against both soil gases and ground moisture.
Sovereign SovDrain CDM 20 is a high performance cavity drainage system membrane. It provides a robust drainage membrane suitable for use on floors, as part of the SovDrain Waterproofing system. SovDrain CDM 20 is easily cut to shape/size using a knife or scissors. This membrane is typically finished with either a Sovereign SBR Bonding Agent modified screed (minimum 65mm) or a floating floor.
Drybase Plaster Mesh Membrane LP is produced using high-quality Polypropylene material and provides a barrier to moisture, salts and vapour. It is a slimline membrane with 2.5mm studs on the rear that enables the management of moisture without significantly reducing room space. A plastic mesh is welded to the front surface of the membrane, allowing it to accept plaster coats via standard trowel application or as a base for dot and dab plasterboard application.
Sovereign CDM8 membrane provides a robust drainage membrane suitable for above and below ground applications to walls and floors as part of the SovDrain waterproofing system. With a fast track application, the membrane protects new finishes from the effects of dampness and/or salt contamination in above ground situations, and prevents water ingress below ground in areas such as cellars, basements, vaults, and tunnels. This membrane has a relatively low stud profile (8mm), thus minimising wall and floor level changes. The CDM8 membrane is typically finished with either a pre-treated timber stud partition wall and plasterboard or independent stud metal frame system. The floors can be finished with a Sovereign SBR modified screed (minimum 65mm) or a floating floor.
Damplas Radon Gas Barrier is a high-quality, sustainable solution designed to protect buildings from the dangerous ingress of radon gas. Manufactured from a controlled blend of 100% recycled polythene, this membrane offers an eco-friendly yet robust defense for residential and commercial flooring constructions.
Beyond its primary function as a gas barrier, Damplas Radon also serves as a high-performance damp proof membrane (DPM), providing dual-layer protection against both soil gases and ground moisture.
Sovereign SovDrain CDM 20 is a high performance cavity drainage system membrane. It provides a robust drainage membrane suitable for use on floors, as part of the SovDrain Waterproofing system. SovDrain CDM 20 is easily cut to shape/size using a knife or scissors. This membrane is typically finished with either a Sovereign SBR Bonding Agent modified screed (minimum 65mm) or a floating floor.