50mm x 2400mm x 1200mm Ecotherm Eco-versal Pitched Roof Insulation PR50
Hover Over to Zoom In
Overview
- BBA certified
- Non irritant, rigid boards are easy to cut and fit between rafters / studs
- Will not rot, sag or decay – no need to replace
- Lightweight boards will not weigh structure down
- Out performs traditional insulants by 50% - you need approximately half the thickness
- Universal board can be used in a number of applications – reduced waste
Technical specification
Brand Name
Ecotherm
Length
2400 mm
Thickness
50 mm
Width
1200 mm
Type
Roof Insulation
Reviews
Be the first to review this product.
Superfoil SF40 Insulation 1.5m x 10m 15m2 Per Pack
SuperFOIL SF40 delivers unmatched thermal performance in a multi foil insulation, offering the most
efficient and cost effective insulation solutions available.
3 in 1 product – High Performance Insulation, Vapour Control Layer and Radiant Barrier in one.
Suitable for New Build, Retrofit or Extensions in roof, wall and floor applications.
£300.37 each (Inc. VAT)
CLEARANCE
Photonfoil Reflective Insulation is a thin, reflective composite insulation option for loft conversions, extensions and re-roofing projects. It is an excellent vapour and air-leakage barrier with a high density glass wool core and low emissivity outer layers. Provides coverage area of 12m2.
£109.15 each (Inc. VAT)
Actis Hybris Panels 155mm 2 Pack 2.74m2
Is made of shaped polyethylene foams glued to aluminium coated polyethylene foils. The unique honeycomb structure composes of a large number of low emissivity cavities that ensure high thermal performance. The reflective insulation product has a heat capacity of 2300JK/kgK. The panels can be used on timber frame, masonry walls, pitched roof, ceilings, floors & suspended timber floors. The lightweight Hybris panels have a tensile strength greater than 45kPa before and after ageing in both longitudinal and transversal directions. The tensile strength is tested to EN 1608 and the tearing and nail shank resistance to EN 12310- 1 part 1.
£63.11 per pack (Inc. VAT)
115mm x 1190mm x 450mm Thermaclass Cavity Wall 21
Thermaclass Cavity Wall 21 is an easy to install, polyisocyanurate (PIR) insulation board for full fill cavity wall applications, with excellent thermal performance (0.021 W/m.K). Featuring a low emissivity foil facing, it can be installed with up to a 10mm residual cavity (to support ease of installation and accommodate mortar squeeze) or as a full fill solution with no residual cavity.
£24.02 per sheet (Inc. VAT)