Eco-Liner is suitable for both adhesive dot and dab application or mechanically fixed systems and is ideal for refurbishing existing walls to a higher thermal performance.
Dry line and insulates in one application
1 board, 2 different application methods available
Offers high thermal performance in practical thicknesses - saving space internally
Will not rot, sag or decay.
Technical specification
Length
2400 mm
Thickness
52.5 mm
Width
1200 mm
Material
PIR
Usage
Ideal for room-in-the-roof applications, walls and cold flat roofs
Actis Hybris Panels are 1.2m in length, 114.5 cm in width, and have a thickness of 15.5cm, providing a total coverage area of 2.74m2.
Made of shaped polyethylene foam bonded to aluminium-coated films, their honeycomb structure with low-emissivity cavities provides high thermal efficiency. Heat capacity is 2300JK/kgK. Suitable for timber frames, masonry, pitched roofs, ceilings, and floors. Lightweight with tensile strength over 45kPa, tested to EN 1608 and EN 12310-1, durability maintained after ageing.
Acoustic Intumescent Sealant is a high specification, one part water based acrylic sealant. Acoustic Intumescent Sealant is designed for use in the installation of ROCKWOOL Ablative Coated Batt, sealing linear joints and some individual service penetrations passing through various substrates.
Range Description
FIREPRO
Brand Name
Rockwool
Manufacturer Model No
212902
Size
310 ml
Container Type
Cartridge
Certifications Met
CoCoP: 2531-CPR-CXO10266, ETA - 20/1129, ETA - 20/1130, UL-EU: 01203-CPR
Rockwool Ablative Coated Batt 1.2m in length, 60cm in width, and has a thickness of 5cm, providing a total coverage area of 0.72m2.
Specially designed insulation batt that acts as an air seal barrier whilst reinforcing fire resistance and acoustic performance of concrete floors, masonry walls, and drylining systems. Its unique design means it has outstanding fire performance of up to 4 hours, whilst remaining lightweight enough to ensure easy installation. This product has been tested for its airtightness performance and requires no maintenance once installed.
Range Description
FIREPRO
Brand Name
Rockwool
Manufacturer Model No
123094
Length
1200 mm
Thickness
50 mm
Width
600 mm
Material
Stone Wool/Ablative Coating
Acoustic
Yes
Thermal Conductivity
0.038 W/mK
Coverage
0.72 m2
Certifications Met
CoCoP: 2531-CPR-CXO10265, ETA - 22/0157, UL-EU: 01208-CPR
Actis Hybris Panels are 1.2m in length, 114.5 cm in width, and have a thickness of 10.5cm, providing a total coverage area of 5.49m2.
Made of shaped polyethylene foam bonded to aluminium-coated films, their honeycomb structure with low-emissivity cavities provides high thermal efficiency. Heat capacity is 2300JK/kgK. Suitable for timber frames, masonry, pitched roofs, ceilings, and floors. Lightweight with tensile strength over 45kPa, tested to EN 1608 and EN 12310-1, durability maintained after ageing.
Actis Hybris Panels are 1.2m in length, 114.5 cm in width, and have a thickness of 15.5cm, providing a total coverage area of 2.74m2.
Made of shaped polyethylene foam bonded to aluminium-coated films, their honeycomb structure with low-emissivity cavities provides high thermal efficiency. Heat capacity is 2300JK/kgK. Suitable for timber frames, masonry, pitched roofs, ceilings, and floors. Lightweight with tensile strength over 45kPa, tested to EN 1608 and EN 12310-1, durability maintained after ageing.
Acoustic Intumescent Sealant is a high specification, one part water based acrylic sealant. Acoustic Intumescent Sealant is designed for use in the installation of ROCKWOOL Ablative Coated Batt, sealing linear joints and some individual service penetrations passing through various substrates.
Rockwool Ablative Coated Batt 1.2m in length, 60cm in width, and has a thickness of 5cm, providing a total coverage area of 0.72m2.
Specially designed insulation batt that acts as an air seal barrier whilst reinforcing fire resistance and acoustic performance of concrete floors, masonry walls, and drylining systems. Its unique design means it has outstanding fire performance of up to 4 hours, whilst remaining lightweight enough to ensure easy installation. This product has been tested for its airtightness performance and requires no maintenance once installed.
Actis Hybris Panels are 1.2m in length, 114.5 cm in width, and have a thickness of 10.5cm, providing a total coverage area of 5.49m2.
Made of shaped polyethylene foam bonded to aluminium-coated films, their honeycomb structure with low-emissivity cavities provides high thermal efficiency. Heat capacity is 2300JK/kgK. Suitable for timber frames, masonry, pitched roofs, ceilings, and floors. Lightweight with tensile strength over 45kPa, tested to EN 1608 and EN 12310-1, durability maintained after ageing.