Please be aware that we will be performing scheduled maintenance on our website from 12:00pm BST on Saturday, May 3rd until 9:00am BST on Monday, May 5th. During this time, our website will be temporarily unavailable. We apologise for any inconvenience this may cause.
Door faces are pre-primed, the smooth high density faces ensures an optimum base for a high quality paint finish
Standard core specification with single lock block, for light duty applications
Can be trimmed up to a maximum of 5mm on any edge - any reductions should be removed evenly from each edge
It is recommended that 3 hinges are fitted to all doors weighing more than 20kg or where large differences in temperature or humidity on opposing faces can be expected. The lock block is manufactured from particle board and is located on one side of the door, the location is highlighted by ink jet printing on the top edge of the door
Recommended that all areas of the door should be finished with one final coat of paint
Non listed sizes and lipped doors available contact Local Branch for details