Free Click & Collect
Within One Hour
Delivery address
Collection branch
Ideas & Advice
VAT
EX
INC
Calder Industrial Code 4 Lead Flashing 390mm x 6000mm
Hover Over to Zoom In
Frequently bought together
Overview
- Lead is one of the most environmentally-friendly materials used in the construction industry
- The initial installation cost of lead is comparable to man-made flashings when the additional expense of adhesives and sealants are taken into account
- Lead is quick and easy to install in most weather conditions and requires no adhesive or other fixing materials
- Alternatives are very limited in the types of applications that they can be used for, and would not be suitable for more decorative flashings for which lead is renowned
- When bossed or dressed correctly lead has few laps or joints resulting in a high degree of weather tightness
- Lead lasts up to 100 years and when used for flashings will last three times longer than most man-made products there is little post-installation inspection or maintenance is required
- All lead sheet should be coated with patination oil after installation
- Guides to cover flashing and step flashing are available at http://www.calderlead.co.uk/downloads/ or use the link at http://youtu.be/eS4CfS-K0PE and http://youtu.be/GBtvHif6bTE
- Please refer to the Calder Training Module Ask a Question for a quick guide to selling lead
Technical specification
Length
6000 mm
Thickness
1.80 mm
Width
390 mm
Weight
48 kg
Material
Lead
Coverage
As roll length stated, less wastage
Usage
Exterior
Type
Lead Flashing
Brand Name
Calder
Reviews
Be the first to review this product.
Liniar Soffit F Trim White 3000mm x 50mm (Pack of 5)
The general purpose trim from Liniar is used for soffit applications. It is a two part trim for hollow soffit and 9mm soffit board to produce clean finished edges. Manufactured in the UK extrusion facility, Liniar foam trims are made from 100 percent lead-free uPVC. It does not require the user to peel the back of the tape or mark the board while cutting.
£107.10 per pack (Inc. VAT)
Tyvek® Supro Plus, with integral tape, Breather Membrane 1.5m x 50m
Tyvek® Supro is the market-leading breather membrane, helping to protect roofs against wind and water, and also improve energy efficiency. Tyvek® Supro is a durable, water resistant membrane that is reinforced with a laminated polypropylene nonwoven. This airtight, vapour-permeable membrane is extremely water-resistant, and can be used for all supported and unsupported pitched roofs. Tyvek® Supro does not need any soffit, tile or ridge ventilation, which can save time and money in the construction process. In addition to warm, hybrid and cold roofs, applications include Scottish sarking board systems, low-pitched metal roofs, and wall and floor applications. Tyvek® Supro Plus offers the same benefits, plus an integral adhesive lap tape designed for use in the Tyvek® sealed roof system. Sealing all horizontal laps contributes to the system’s thermal efficiency by reducing air infiltration.
£224.77 per roll (Inc. VAT)
Winn & Coales Densostrip Rubber Bitumen Sealing Strip 12mm x 80mm x 6m
A compound rubber and bitumen joint sealing strip for sealing the joints of precast concrete units to provide a permanently flexible watertight seal when compressed between joint faces previously primed with Densostrip Primer.
£63.47 each (Inc. VAT)
Fibre Glass Top Coat Grade A 10kg
Manufactured for us by a world leading gelcoat and flocoat manufacturer. When used with our resins and glass reinforcing achieves FAA fire rating. No extra coverings are required to achieve FAA. Available in mid grey Ral 7046, dark grey RAL 7011 or clear. We can supply in any colour upon request from the BS colour range or the European RAL colour range. Guaranteed for 20 or 25 years depending on resin choice. Available in 20kg, 10kg and 5kg tins.
£156.85 each (Inc. VAT)