The 54V Cordless DCS7485 with brushless motor has the ability to cut 92 metres of 19mm OSB from a single battery charge. You can now complete the toughest jobs with no trailing cables. It runs on the Worlds first 18/54V convertible battery pack system giving you raw power anywhere and the dawn of a new era in cordless power tool technology. This will provide in excess of a full day's runtime on a single charge for most users. The potential for this technology is limitless for each and every trade with game changing levels of performance. The DCS748 has a 210mm blade, an accurate fence utilising rack and pinion adjustment and a 480mm x 480mm table size. A great machine for fitting solid wood flooring, general sizing of panels, concrete form work, sizing timber for joinery and fitting out decks.
Wet and dry L-class dust extractor. Class L - Removes 99.0% of dust with limit value for occupational exposure >1.0mg/m3 Suitable for processes involving mica, china clay, gypsum. 240 volt unit with power take off
New TurboBoost switch boosts performance. Improved ergonomics and styling for greater working comfort. Improved gearing and bearing system reduces vibration by 25% for greater working comfort and safety. The orbit diameter range has increased from 3 - 6 mm to 2.8 or 6.2 mm giving a finer finish (2.8 mm) and higher stock removal (6.2 mm) capability allowing the machine to work harder so you don?t have to. Improved dust retention system through use of Metabo Intec filter cartridge.
Demolition Hammer with 7.6 joules of impact energy. Accepts SDS MAX points and chisels. Features soft start, constant speed and variable speed. Supplied with side handle and carry case
The 54V Cordless DCS7485 with brushless motor has the ability to cut 92 metres of 19mm OSB from a single battery charge. You can now complete the toughest jobs with no trailing cables. It runs on the Worlds first 18/54V convertible battery pack system giving you raw power anywhere and the dawn of a new era in cordless power tool technology. This will provide in excess of a full day's runtime on a single charge for most users. The potential for this technology is limitless for each and every trade with game changing levels of performance. The DCS748 has a 210mm blade, an accurate fence utilising rack and pinion adjustment and a 480mm x 480mm table size. A great machine for fitting solid wood flooring, general sizing of panels, concrete form work, sizing timber for joinery and fitting out decks.
Wet and dry L-class dust extractor. Class L - Removes 99.0% of dust with limit value for occupational exposure >1.0mg/m3 Suitable for processes involving mica, china clay, gypsum. 240 volt unit with power take off
New TurboBoost switch boosts performance. Improved ergonomics and styling for greater working comfort. Improved gearing and bearing system reduces vibration by 25% for greater working comfort and safety. The orbit diameter range has increased from 3 - 6 mm to 2.8 or 6.2 mm giving a finer finish (2.8 mm) and higher stock removal (6.2 mm) capability allowing the machine to work harder so you don?t have to. Improved dust retention system through use of Metabo Intec filter cartridge.
Demolition Hammer with 7.6 joules of impact energy. Accepts SDS MAX points and chisels. Features soft start, constant speed and variable speed. Supplied with side handle and carry case