A top quality high opacity emulsion based on unique AkzoNobel technology which gives excellent coverage and application as well as a durable finish which lasts everyday living.
Excellent Opacity
Tough wipeable finish
Please note: The colour on screen may appear different from the paint.
Please note: Product is non-refundable
Technical specification
Colour Family
Blues
Finish
Matt
Size
5 L
Application Method
Brush, Roller or Spray
Coverage per Litre
Up to 17 m?
Drying Time
Dependent on temperature/humidity
Drying time between coats
2 - 4 hrs
Clean equipment with
After use, remove as much paint as possible from equipment before cleaning with water
ProSolve PVSMG7A Site Marker Aerosol, 750ml, Green. The ProSolve Site Marker is an economical and multifunctional aerosol-based line marking paint. Its rapid-drying, high-resistance formulation (formulated without lead and xylene) is suitable for precise marking on diverse substrates such as concrete, tarmac, timber, and composite materials.
MGC QUICK DRYING STAIN BLOCK is a water based, Matt, white blocking primer that has excellent adhesion to most surfaces including plaster, concrete, wood and previously painted surfaces. It will seal in all stains preventing them from bleeding through and spoiling new decorations. It is touch dry in 30 minutes and can be decorated over with any type of paint, undercoat or wallpaper
Size
2.5 L
Suitable for
Wide range of surfaces Interior and Exterior
Colour
White
Colour Family
White
Drying Time
Touch dry in 30 minutes, depending on temprature and humidity
Drying time between coats
touch dry in 30 minutes re-coat if necessary after 2 hours depending on temprature and humidity
Coverage
Approximately 7 square metres per litre, per coat depending on absorbency of the substrate
Coverage per Litre
Approximately 7 square metres per litre per coat depending on absorbency of the substrate
Ronseal Trade Polyurethane Varnish is a traditional solvent based varnish that provides tough protection against knocks, scuffs and scratches.
Ensure the room is warm and well-ventilated. Sand the wood in the direction of the grain using 120 grit paper. Wear a suitable mask to avoid the inhalation of dust. Wipe away dust with white spirit and allow to dry. Always use a good quality, soft bristle brush. Stir the varnish thoroughly. Apply 3 coats leaving 6 hours between coats. Lightly sand with 240 grit paper and remove dust prior to application of the final coat.
Size
0.75 L
Suitable for
Suitable for providing tough protection against knocks, scuffs and scratches.
ProSolve PVSMB7A Site Marker Aerosol, 750ml, Blue. The ProSolve Site Marker is an economical and multifunctional aerosol-based line marking product. Its rapid-drying, high-durability formulation-free from lead and xylene-is suitable for marking a range of substrates, including concrete, asphalt, timber, and composite materials.
ProSolve PVSMG7A Site Marker Aerosol, 750ml, Green. The ProSolve Site Marker is an economical and multifunctional aerosol-based line marking paint. Its rapid-drying, high-resistance formulation (formulated without lead and xylene) is suitable for precise marking on diverse substrates such as concrete, tarmac, timber, and composite materials.
MGC QUICK DRYING STAIN BLOCK is a water based, Matt, white blocking primer that has excellent adhesion to most surfaces including plaster, concrete, wood and previously painted surfaces. It will seal in all stains preventing them from bleeding through and spoiling new decorations. It is touch dry in 30 minutes and can be decorated over with any type of paint, undercoat or wallpaper
Ronseal Trade Polyurethane Varnish is a traditional solvent based varnish that provides tough protection against knocks, scuffs and scratches.
Ensure the room is warm and well-ventilated. Sand the wood in the direction of the grain using 120 grit paper. Wear a suitable mask to avoid the inhalation of dust. Wipe away dust with white spirit and allow to dry. Always use a good quality, soft bristle brush. Stir the varnish thoroughly. Apply 3 coats leaving 6 hours between coats. Lightly sand with 240 grit paper and remove dust prior to application of the final coat.
ProSolve PVSMB7A Site Marker Aerosol, 750ml, Blue. The ProSolve Site Marker is an economical and multifunctional aerosol-based line marking product. Its rapid-drying, high-durability formulation-free from lead and xylene-is suitable for marking a range of substrates, including concrete, asphalt, timber, and composite materials.