EASYPrime is an easy to apply high strength bonding agent for use when laying natural stone and porcelain paving. EASYPrime ensures full and permanent contact is achieved with the aggregated mortar in the bedding layer.
Ideal for family gardens, the Saxon paving slab by Marshalls suits both traditional and modern designs. Featuring a granular texture, this concrete paving block provides a non-slip surface even under wet conditions, and delivers high performance with optimum safety.
Our 17kg Priming Slurry is a polymer-based, cementitious mixture formulated to establish a high-strength adhesion interface between the substrate and subsequent mortar bed for porcelain or stone pavers. The powdered primer readily dissolves in water and can be uniformly applied to the reverse side of the paving units using a trowel, roller, or brush.
Size
17 kg
Coverage
12m2
Working Time
1hr
Colour
Grey
Package Type
Tub
Type
Priming Slurry
Made To Order
N
Manufacturer Model No
PTPRSL17
Country Origin
UK
Brand Name
Pavetuf
Range Description
Pavetuf Priming Slurry is a polymer and cementitious slurry, specifically formulated to provide an exceptional bond between a new mortar base and porcelain or stone paving. The powdered primer mixes easily with water and is simply applied to the back of your paving with either a trowel, roller or paint brush.
Specially formulated for porcelain paving, ProJoint Porcelain Grout has been developed for joint widths of 2mm to 20mm and is ideal for external or internal use. The anti-mould growth technology with added silicone, helps limit mould growth and allows ProJoint Porcelain Grout to repel water from the surface of the grout, whilst allowing vapour to pass through. ProJoint Porcelain Grout is supplied in two 10kg bags, to allow the bucket to act as the ideal mixing vessel.
Brand Name
Nexus
Size
20 kg
Coverage
Coverage per 20kg, with joint size 5x20mm, slab size: 600x600mm should be approximately 37.31m2. Visit www.nexuspavingsystems.co.uk/calculator to calculate your requirements
Colour
Mid Grey
Drying Time
Cured for foot traffic after 3 hours (at 20oC, fully cured after 72 hours (at 20oC)
Time to Set
Cured for foot traffic after 3 hours (at 20oC, fully cured after 72 hours (at 20oC)
Walk On Hardness Time
Cured for foot traffic after 3 hours (at 20oC, fully cured after 72 hours (at 20oC)
EASYPrime is an easy to apply high strength bonding agent for use when laying natural stone and porcelain paving. EASYPrime ensures full and permanent contact is achieved with the aggregated mortar in the bedding layer.
Ideal for family gardens, the Saxon paving slab by Marshalls suits both traditional and modern designs. Featuring a granular texture, this concrete paving block provides a non-slip surface even under wet conditions, and delivers high performance with optimum safety.
Our 17kg Priming Slurry is a polymer-based, cementitious mixture formulated to establish a high-strength adhesion interface between the substrate and subsequent mortar bed for porcelain or stone pavers. The powdered primer readily dissolves in water and can be uniformly applied to the reverse side of the paving units using a trowel, roller, or brush.
Specially formulated for porcelain paving, ProJoint Porcelain Grout has been developed for joint widths of 2mm to 20mm and is ideal for external or internal use. The anti-mould growth technology with added silicone, helps limit mould growth and allows ProJoint Porcelain Grout to repel water from the surface of the grout, whilst allowing vapour to pass through. ProJoint Porcelain Grout is supplied in two 10kg bags, to allow the bucket to act as the ideal mixing vessel.