Rawlplug Frame Screw 7.5mm x 132mm Torx Head - Bag of 20
359432
Hover Over to Zoom In
Overview
Countersunk Head
Made of hardened steel, electro-zinc coated
Imposes less stress on substrate during installation due to no expansion force
Small hole diameter giving high loads
Easily removed for temporary works
Suitable for use in pre-drilled 6mm diameter concrete, full and hollow bricks, stone and structural clay tile and without pre-drilling in aerated concrete and timber
Applications include use with door and window frames, suspended ceilings and lightweight steel angles
This ThermaLine PIR plasterboard from British Gypsum is factory bonded to rigid polyisocyanurate foam for an advanced level of thermal insulation. Both the faces of the insulant are lined with a multi-layer vapour control barrier to reduce the risk of condensation. It is ideal for both refurbishment and new build where a substantial upgrade is required. Provides coverage area of 2.88m2.
A gypsum based board ideal for internal use for walls and ceilings. Easy to cut, shape and fix, it can be plastered ordirectly decorated, Not suitable for moist or wet conditions. This product comes in a square edge finish. When fixing this plasterboard sheet use drywall screws.
Gyproc WallBoard DUPLEX, backed with a vapour controlled membrane, is a high-quality and durable product. This wallboard features an aerated Gypsum centre, secured by bonded paper liners and polyester film.
With an Ivory-faced paper and metallised polyester film reverse, it can be used for wall and ceiling linings where vapour control and plasterboard lining are required in one fixing operation.
Gyproc WallBoard DUPLEX is a plasterboard that is suitable for dry lining internal surfaces.
Gypsum plasterboard with glass fibre and additional additives to increase the fire protection characteristics with pink paper lining for easy recognition. The additional fire protection properties above standard board products enable the plasterboard to be used in partition, ceiling and steel encasement systems where more stringent fire performance is required such as in domestic separating walls, corridors, garages and steel encasement.
This ThermaLine PIR plasterboard from British Gypsum is factory bonded to rigid polyisocyanurate foam for an advanced level of thermal insulation. Both the faces of the insulant are lined with a multi-layer vapour control barrier to reduce the risk of condensation. It is ideal for both refurbishment and new build where a substantial upgrade is required. Provides coverage area of 2.88m2.
A gypsum based board ideal for internal use for walls and ceilings. Easy to cut, shape and fix, it can be plastered ordirectly decorated, Not suitable for moist or wet conditions. This product comes in a square edge finish. When fixing this plasterboard sheet use drywall screws.
Gyproc WallBoard DUPLEX, backed with a vapour controlled membrane, is a high-quality and durable product. This wallboard features an aerated Gypsum centre, secured by bonded paper liners and polyester film.
With an Ivory-faced paper and metallised polyester film reverse, it can be used for wall and ceiling linings where vapour control and plasterboard lining are required in one fixing operation.
Gyproc WallBoard DUPLEX is a plasterboard that is suitable for dry lining internal surfaces.
Gypsum plasterboard with glass fibre and additional additives to increase the fire protection characteristics with pink paper lining for easy recognition. The additional fire protection properties above standard board products enable the plasterboard to be used in partition, ceiling and steel encasement systems where more stringent fire performance is required such as in domestic separating walls, corridors, garages and steel encasement.