Quick-deploy and quick-collapse legs � Instant setup is 30x faster than conventional sawhorses. Both setup and teardown take mere seconds.
Best-in-class weight capacity � Each individual unit can support 1500 lbs. � 200 lbs. more than the leading competitors.
Non-sequential leg folding � To tear down your worksite, just pull the levers on each end and fold the legs up � doesn't matter which order.
Longer, pre-drilled top � More length means more stability. The pre-drilled metal top allows you to screw in a 2x4 as a sacrificial top, saving your equipment from damage.
The Speedhorse is a well made tool and a good buy.
I am a professional remodeling contractor.I just purchased a two pack of new Speedhorse saw horses and they are really great so far. I love the fact that they are light weight but really strong. These Speedhorses have the strength of steel horses without the heavy weight. They do not flex when you have heavy frami ...
The DeWalt 18V XR Lithium Ion Brushless Hammer drill is lightweight and compact for working in tight spaces for long periods of time. The high-speed transmission delivers 3 speed variations allowing users to choose the level of performance needed. Its innovative 13mm keyless chuck with automatic spindle lock makes changing bits easier. It features 11 adjustable torque positions for consistent screwdriving within a variety of materials. This kit includes 2x 18V Li-Ion 5.0 Ah batteries, this means that you will always be able to use your drill continuously when you need it.
Manufacturer Model No
DCD996P2-GB
Brand Name
DeWalt
Blows per Minute
0–38,250 bpm
Maximum Torque
95 Nm
Maximum Diameter (Masonry)
13 mm to 16 mm
Maximum Diameter (Wood)
55 mm
Maximum Diameter (Steel)
15 mm
Number of Torque Settings
13
Brushless
Yes
Wattage
820 W
No Load Speed
2,250 rpm
Weight
2.13 kg
Chuck Capacity
13 mm
Chuck Type
Keyless
Power Type
Cordless
Battery Type
Lithium-ion
Battery Storage Capacity
5.0 Ah
Number of Batteries
2
Charge Time
Approx. 75 minutes
Voltage
18 V
Case
Yes
Includes
2 x 5.0Ah Li-Ion XR Batteries, Multi-Voltage XR Charger, Belt Hook, Magnetic Bit Holder, Multi-Position Side Handle and TSTAK Compatible Kit Box
The DeWalt DS280 Toughsystem® Tote with Handle has been constructed from thick reinforced structural foam plastic for added durability and enhanced longevity. The open tote design allows full visibility and easy quick access to your tools, small parts and accessories. The Toughsystem® modular storage solution allows multiple Toughsystem® units to be stacked together using the side latches, allowing for customisation of storage needs depending on what is required for a jobsite. All units have an IP65 rating against water and dust, ensuring the safe and dry storage of tools during transportation and onsite.
Milwaukee M18 FUEL 115 mm Variable Speed Braking Angle Grinder with Paddle Switch provides optimal control across various applications through a 5-step speed dial, specifically engineered for processes involving stainless steel, aluminum, and rust or paint removal. The RAPIDSTOP technology ensures the quickest disc braking, achieving cessation in under 2 seconds for enhanced user safety. The non-lockable safety paddle switch features a line-lock-out function to inhibit unintentional start-up, complemented by an anti-vibration side handle to minimize user fatigue. Additionally, the integrated FIXTEC system facilitates tool-free wheel changes.
Disc Diameter
115 mm
Bore Size
22.23 mm
Grinding Spindle Thread
M14
Length
333 mm
Weight
2.7 kg
No Load Speed
3,500 to 8,500 rpm
Power Type
Cordless
Wattage
N/A
Voltage
18V
Noise Sound Power
93.6 dB(A)
Noise Sound Pressure
82.6 dB(A)
Noise K Factor
3 dB(A)
Vibration Artificial Wheel
4.79 M/S2
Vibration K Factor
1.5M/S2
Includes
1 x Milwaukee M18FSAGV115XPDB-0 Angle Grinder Body 1 x Quick-Release Safety Guard 1 x Clip-On Cutting Guard Access 1 x AVS (Anti-Vibration System) Side Handle 1 x FIXTECâ„¢ Tool-Free Flange Nut 1 x Inner Backing Flange 1 x Two-Pin Spanner Wrench 2 x Removable Slotted Debris Dust Screens(Note: As a "-0" bare unit variant, this specific product package does not include a battery, charger, or hard kitbox case)
The Milwaukee M18 FUEL 18V Generation 4 system is equipped with two 5.0Ah LI-ION Redlithium batteries. The model M18FPD3 demonstrates superior power efficiency under load, providing a torque output of 158 Nm while maintaining a compact length of 175 mm, facilitating access to confined spaces. The 13 mm metal chuck enables rapid bit changes and enhances bit retention, while the AUTOSTOP™ control mode improves operator safety by preventing excessive rotation during a bind-up scenario.
1 x M18 FPD3 FUELâ„¢ Gen 4 13mm Percussion/Combi Hammer Drill 1 x M18 FID3 FUELâ„¢ Gen 4 1/4" Hex Impact Driver 2 x M18 B5 18V 5.0Ah REDLITHIUMâ„¢ Battery Packs 1 x M12-18FC Dual-Voltage Rapid Battery Charger (Charges an M18 5.0Ah battery in ~59 minutes) 1 x Heavy-Duty Blow-Moulded Carry Case (Dynacase/HD Box) 1 x Side Handle (for the Combi drill), all-metal reversible belt clips, and bit holders
The DeWalt 18V XR Lithium Ion Brushless Hammer drill is lightweight and compact for working in tight spaces for long periods of time. The high-speed transmission delivers 3 speed variations allowing users to choose the level of performance needed. Its innovative 13mm keyless chuck with automatic spindle lock makes changing bits easier. It features 11 adjustable torque positions for consistent screwdriving within a variety of materials. This kit includes 2x 18V Li-Ion 5.0 Ah batteries, this means that you will always be able to use your drill continuously when you need it.
The DeWalt DS280 Toughsystem® Tote with Handle has been constructed from thick reinforced structural foam plastic for added durability and enhanced longevity. The open tote design allows full visibility and easy quick access to your tools, small parts and accessories. The Toughsystem® modular storage solution allows multiple Toughsystem® units to be stacked together using the side latches, allowing for customisation of storage needs depending on what is required for a jobsite. All units have an IP65 rating against water and dust, ensuring the safe and dry storage of tools during transportation and onsite.
Milwaukee M18 FUEL 115 mm Variable Speed Braking Angle Grinder with Paddle Switch provides optimal control across various applications through a 5-step speed dial, specifically engineered for processes involving stainless steel, aluminum, and rust or paint removal. The RAPIDSTOP technology ensures the quickest disc braking, achieving cessation in under 2 seconds for enhanced user safety. The non-lockable safety paddle switch features a line-lock-out function to inhibit unintentional start-up, complemented by an anti-vibration side handle to minimize user fatigue. Additionally, the integrated FIXTEC system facilitates tool-free wheel changes.
The Milwaukee M18 FUEL 18V Generation 4 system is equipped with two 5.0Ah LI-ION Redlithium batteries. The model M18FPD3 demonstrates superior power efficiency under load, providing a torque output of 158 Nm while maintaining a compact length of 175 mm, facilitating access to confined spaces. The 13 mm metal chuck enables rapid bit changes and enhances bit retention, while the AUTOSTOP™ control mode improves operator safety by preventing excessive rotation during a bind-up scenario.