Quick-deploy and quick-collapse legs � Instant setup is 30x faster than conventional sawhorses. Both setup and teardown take mere seconds.
Best-in-class height adjustment � the sawhorse deploys at the minimum height of 30 in., and will raise up to 36 in., giving an incredible amount of flexibility.
Best-in-class weight capacity � Each individual unit can support 1500 lbs. � 200 lbs. more than the leading competitors.
Non-sequential leg folding � To tear down your worksite, just pull the levers on each end and fold the legs up � doesn't matter which order.
Longer, pre-drilled top � More length means more stability. The pre-drilled metal top allows you to screw in a 2x4 as a sacrificial top, saving your equipment from damage.
I have had several home improvement projects and these sawhorses made them so much easier. 4x8 sheets of plywood were a fright to cut before, but with 2 to 4 2x4s to make the support surfaces and the circular saw guide I bought (Bora!) it is way easier. I also like the sturdiness of them. I placed a huge amount ...
Compact and well balanced planer with a 2mm depth of cut and a 9mm rebate capacity. 0.1mm indexed fine adjustment for accurate planing. Brushless motor for excellent efficiency and long tool life. XR switch and module protect the motor from overload and battery from deep discharge. AirLock port compatibility with dust bag or extraction. Traditional blade change with hex wrench or torx key. Includes on-board blade storage for 2 x 82mm blades and Torx key storage to minimise down time. Supplied with 82mm reversible TCT blades, guide fence and alignment guide. Compatible with DeWalt XR Li-ion slide pack batteries. (Please note battery is not included).
The DeWalt DS280 Toughsystem® Tote with Handle has been constructed from thick reinforced structural foam plastic for added durability and enhanced longevity. The open tote design allows full visibility and easy quick access to your tools, small parts and accessories. The Toughsystem® modular storage solution allows multiple Toughsystem® units to be stacked together using the side latches, allowing for customisation of storage needs depending on what is required for a jobsite. All units have an IP65 rating against water and dust, ensuring the safe and dry storage of tools during transportation and onsite.
The Milwaukee M18 FUEL 18V Generation 4 system is equipped with two 5.0Ah LI-ION Redlithium batteries. The model M18FPD3 demonstrates superior power efficiency under load, providing a torque output of 158 Nm while maintaining a compact length of 175 mm, facilitating access to confined spaces. The 13 mm metal chuck enables rapid bit changes and enhances bit retention, while the AUTOSTOPâ„¢ control mode improves operator safety by preventing excessive rotation during a bind-up scenario.
1 x M18 FPD3 FUELâ„¢ Gen 4 13mm Percussion/Combi Hammer Drill 1 x M18 FID3 FUELâ„¢ Gen 4 1/4" Hex Impact Driver 2 x M18 B5 18V 5.0Ah REDLITHIUMâ„¢ Battery Packs 1 x M12-18FC Dual-Voltage Rapid Battery Charger (Charges an M18 5.0Ah battery in ~59 minutes) 1 x Heavy-Duty Blow-Moulded Carry Case (Dynacase/HD Box) 1 x Side Handle (for the Combi drill), all-metal reversible belt clips, and bit holders
A portable workstand that offers fast set-up with no assembly required. Creates a 4ft x 4ft moveable custom workspace that supports 3500 lbs, perfect for any equipment from power tools and heavy machinery to finished projects and glue-ups. Suitable for indoor and outdoor use.
Compact and well balanced planer with a 2mm depth of cut and a 9mm rebate capacity. 0.1mm indexed fine adjustment for accurate planing. Brushless motor for excellent efficiency and long tool life. XR switch and module protect the motor from overload and battery from deep discharge. AirLock port compatibility with dust bag or extraction. Traditional blade change with hex wrench or torx key. Includes on-board blade storage for 2 x 82mm blades and Torx key storage to minimise down time. Supplied with 82mm reversible TCT blades, guide fence and alignment guide. Compatible with DeWalt XR Li-ion slide pack batteries. (Please note battery is not included).
The DeWalt DS280 Toughsystem® Tote with Handle has been constructed from thick reinforced structural foam plastic for added durability and enhanced longevity. The open tote design allows full visibility and easy quick access to your tools, small parts and accessories. The Toughsystem® modular storage solution allows multiple Toughsystem® units to be stacked together using the side latches, allowing for customisation of storage needs depending on what is required for a jobsite. All units have an IP65 rating against water and dust, ensuring the safe and dry storage of tools during transportation and onsite.
The Milwaukee M18 FUEL 18V Generation 4 system is equipped with two 5.0Ah LI-ION Redlithium batteries. The model M18FPD3 demonstrates superior power efficiency under load, providing a torque output of 158 Nm while maintaining a compact length of 175 mm, facilitating access to confined spaces. The 13 mm metal chuck enables rapid bit changes and enhances bit retention, while the AUTOSTOPâ„¢ control mode improves operator safety by preventing excessive rotation during a bind-up scenario.
A portable workstand that offers fast set-up with no assembly required. Creates a 4ft x 4ft moveable custom workspace that supports 3500 lbs, perfect for any equipment from power tools and heavy machinery to finished projects and glue-ups. Suitable for indoor and outdoor use.