Free Click & Collect
Within One Hour
Delivery address
Collection branch
Ideas & Advice
VAT
EX
INC
Hep2O HD62/10W Demountable Stop-End 10mm
4
1 Review
Hover Over to Zoom In
Overview
- Comes with a 50-year industry leading guarantee
- Efficient reduction in pipe size
- Hot and cold flexible push-fit plumbing system
- Leak-free connection
- Secure demounting with HepKey system
- Kitemarked to BS 7291 parts 1 and 2
- WRAS approved
- Comprehensive range with multiple diameter and type variations
Technical specification
Diameter
10 mm
Length
37 mm
Connection Type
Push-Fit
Material
Plastic
Colour
White
Years Guaranteed
50
Type
End Fittings
Country Origin
United Kingdom
Manufacturer Model No
HD62/10W
Made To Order
N
Brand Name
Hep2O
22mm Solder Ring Straight Coupler P1 Copper Pipe Fitting
Achieve a permanent, leak-proof joint with this premium 22mm Solder Ring Straight Coupler. Specially designed to join two lengths of 22mm copper pipe, this P1 capillary fitting comes pre-loaded with high-grade, lead-free solder inside the internal ring for fast and reliable installation.s
£1.60 each (Inc. VAT)
15mm Compression Valve x 1/2inch Tap Connector x 50cm
Compression Tap Connector with Isolating Valve for sink and basin taps. Ideal for use when replacing existing pipework.
£6.20 each (Inc. VAT)
JG Speedfit emergency shut off tap 15mm
Speedfit push-fit valve for the connection of plastic and copper pipe. The valve allows the user to stop the flow of water to a fixture or zone in case of emergency or repair. Simply push the valve fully onto the pipe and turn the knob on top of the fitting to allow or with strict the flow of water. Should the need arise to demount the connection push the collet towards the body of the fitting and pull the pipe to release. Installation can be reduced by around 40% against traditional fixing methods. Designed, manufactured and assembled in the UK by John Guest Speedfit.
£10.06 each (Inc. VAT)
JG Speedfit 90° Equal Elbow Elbow 15mm
Speedfit push-fit plastic fitting for the connection of plastic and copper pipe. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods. Note: with all plastic pipes the relevant manufacturers pipe insert is required. Designed, manufactured and assembled in the UK by John Guest Speedfit.
£2.71 each (Inc. VAT)