Delivery address
Collection branch
Ideas & Advice
VAT
EX
INC
Hep2O Flexible Tap Connector 15mm x 3/4in x 500mm HD225B/15W
Hover Over to Zoom In
Overview
- Comes with a 50-year industry leading guarantee
- BS EN 7291 parts 1 and 2, WRAS approved
- For intermittent hot and cold water use up to a maximum of 65-degree celsius
- Hot and cold flexible push-fit plumbing system
- In4Sure joint recognition for secure joints
- Ensures secure demounting with the HepKey system
- Easy to use with reduced installation time
- Colour-coded packaging for easy identification - green 10mm, blue 15mm, purple 22mm and orange 28mmm
Technical specification
Diameter
15 mm
Length
500 mm
Thread Size
3/4"
Connection Type
Push-fit x BSP
Material
PB
Maximum Pressure
18 bar
Colour
Stainless Steel
Finish
Streamlined
Years Guaranteed
50
Type
Tap Connectors
Made To Order
N
Manufacturer Model No
HD225B/15W
Brand Name
Wavin
Range Description
Flexible Connectors
Reviews
Be the first to review this product.
JG Speedfit flexible hose 22mm x 3/4inch 500mm
Speedfit push-fit flexi hose for the connection of plastic and copper pipe to a male thread appliance. Connectors use a grip then seal collet arrangement. This hose is ideal for the connection of taps. Simply push the fitting fully on to the pipe and screw the nut on to the thread of the appliance. Should the need arise to demount the connection push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Note: With all plastic pipes the relevant manufacturer’s pipe insert is required.
£12.98 each (Inc. VAT)
JG Speedfit female tap connector 22mm x 3/4inch
Speedfit push-fit fitting for the connection of plastic and copper pipe to a male thread appliance. The female coupler is ideal for the connection of taps and toilets. In comparison to other installation methods available no tools are required with this hand-tightened connection. Simply push the fitting fully onto the pipe and hand turn onto the thread. Should the need arise to demount the connection push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods. Note: with all plastic pipes the relevant manufacturer’s pipe insert is required. Designed, manufactured and assembled in the UK by John Guest Speedfit.
£4.81 each (Inc. VAT)
JG Speedfit monobloc flexible connector hose 15mm x M10 male
Speedfit push-fit flexi hose for the connection of plastic and copper pipe to a female mixer tap. This hose is ideal for the connection to monobloc mix taps. To make a connection simply push the fitting fully on to the pipe and screw the thread into the bloc. The hose has off set spanner locations to ease installation. Should the need arise to demount the connection push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods Note: With all plastic pipes the relevant manufacturer’s pipe insert is required.
£12.49 each (Inc. VAT)
Compression Swivel Bent Tap Connector 15mm x 1/2 - Bag of 10
Compression Bent Swivel Tap Connector 15mm x 1/2" fittings can used on a wide range of applications including central heating and hot & cold water supplies
£53.88 per bag (Inc. VAT)