The Makita DBO180Z has been developed as Makita's first cordless random orbit sander powered by 18V Li-ion batteries. It has a compact design with short height and lower centre of gravity for better manoeuvrability. Ergonomically best possible grip design
Orbits per Minute
11000 opm
Power Type
Cordless
Sheet Size
123mm
Weight
1.70 kg
Wattage
190 W
Voltage
18 V
Includes
Dust bag,dust bag nozzle,dust nozzle,125mm abrasive disc
The Milwaukee M18 FUEL 18V Generation 4 system is equipped with two 5.0Ah LI-ION Redlithium batteries. The model M18FPD3 demonstrates superior power efficiency under load, providing a torque output of 158 Nm while maintaining a compact length of 175 mm, facilitating access to confined spaces. The 13 mm metal chuck enables rapid bit changes and enhances bit retention, while the AUTOSTOPâ„¢ control mode improves operator safety by preventing excessive rotation during a bind-up scenario.
1 x M18 FPD3 FUELâ„¢ Gen 4 13mm Percussion/Combi Hammer Drill 1 x M18 FID3 FUELâ„¢ Gen 4 1/4" Hex Impact Driver 2 x M18 B5 18V 5.0Ah REDLITHIUMâ„¢ Battery Packs 1 x M12-18FC Dual-Voltage Rapid Battery Charger (Charges an M18 5.0Ah battery in ~59 minutes) 1 x Heavy-Duty Blow-Moulded Carry Case (Dynacase/HD Box) 1 x Side Handle (for the Combi drill), all-metal reversible belt clips, and bit holders
Tough and robust 125mm sander with ergonomic grip areas for comfort when in use. Advanced counter balance provides improved anti-vibration. Quick plate stopping time so the sander can be put down almost instantly after being switch off.
Orbits per Minute
8000 - 12000 opm
Power Type
Mains
Sheet Size
125 mm
Weight
1.28 kg
Wattage
280 W
Voltage
230 V
Includes
Fabric Dust Bag with built-In Extractor Ports, Airlock® compatible
The orbital sander is characterised by compact design, with a weight of just 1.2 kg and the MMC control electronics that guarantee greater removal capacity at a constant powerful speed. Connect the long-life chip collection bag or a Festool dust extractor for dust-free work. The PROTECTOR attachment gives edge protection for less reworking.
The Makita DBO180Z has been developed as Makita's first cordless random orbit sander powered by 18V Li-ion batteries. It has a compact design with short height and lower centre of gravity for better manoeuvrability. Ergonomically best possible grip design
The Milwaukee M18 FUEL 18V Generation 4 system is equipped with two 5.0Ah LI-ION Redlithium batteries. The model M18FPD3 demonstrates superior power efficiency under load, providing a torque output of 158 Nm while maintaining a compact length of 175 mm, facilitating access to confined spaces. The 13 mm metal chuck enables rapid bit changes and enhances bit retention, while the AUTOSTOPâ„¢ control mode improves operator safety by preventing excessive rotation during a bind-up scenario.
Tough and robust 125mm sander with ergonomic grip areas for comfort when in use. Advanced counter balance provides improved anti-vibration. Quick plate stopping time so the sander can be put down almost instantly after being switch off.
The orbital sander is characterised by compact design, with a weight of just 1.2 kg and the MMC control electronics that guarantee greater removal capacity at a constant powerful speed. Connect the long-life chip collection bag or a Festool dust extractor for dust-free work. The PROTECTOR attachment gives edge protection for less reworking.