Wavin OsmaWeld solvent weld waste is manufactured in ABS offering secure jointing, a wide range of fittings (32/40 & 50mm) and black, grey and white colour options.
90 degree knuckle bend with solvent weld sockets
Secure jointing method
Suitable for use with a constant 60°C temperature and intermittent discharges of water up to 90°C
From Glow-Worm, their 90 Degree Flue Bend is created with Glow-Worm condensate boilers in mind. This 90 degree elbow bend can be used to manoeuvre a flue run around obstacles or to create a raised horizontal flue run, used in areas where space is limited. The 90 degree flue bend is fully compatible with the following Glow-worm boilers: 24CXI, 30CXI, 30SXI, 18HXI and 30HXI, and also the Energy boiler range. Condensate can produced acidic residue and therefore needs to be suitably disposed of, helping to maintain the efficiency of the system.
From Glow-Worm, their 45 Degree Flue Bend is created with Glow-Worm condensate boilers in mind. This 45 degree elbow bend can be used to manoeuvre a flue run around obstacles or to create a raised horizontal flue run, used in areas where space is limited. The 45 degree flue bend is fully compatible with the following Glow-worm boilers: 24CXI, 30CXI, 30SXI, 18HXI and 30HXI, and also the Energy boiler range. Condensate can produced acidic residue and therefore needs to be suitably disposed of, helping to maintain the efficiency of the system.
Speedfit offers coil and straight lengths of plastic pipe. All Speedfit pipe contains a 'barrier' that inhibits the ingress of air into the system. Long lengths of plastic pipe creates an easier installation environment with fewer fitting joints required. Always use a Speedfit pipe insert when using Speedfit pipe. To help create a tighter bend than the minimum allowed when the pipe is unsupported.
From Glow-Worm, their 90 Degree Flue Bend is created with Glow-Worm condensate boilers in mind. This 90 degree elbow bend can be used to manoeuvre a flue run around obstacles or to create a raised horizontal flue run, used in areas where space is limited. The 90 degree flue bend is fully compatible with the following Glow-worm boilers: 24CXI, 30CXI, 30SXI, 18HXI and 30HXI, and also the Energy boiler range. Condensate can produced acidic residue and therefore needs to be suitably disposed of, helping to maintain the efficiency of the system.
From Glow-Worm, their 45 Degree Flue Bend is created with Glow-Worm condensate boilers in mind. This 45 degree elbow bend can be used to manoeuvre a flue run around obstacles or to create a raised horizontal flue run, used in areas where space is limited. The 45 degree flue bend is fully compatible with the following Glow-worm boilers: 24CXI, 30CXI, 30SXI, 18HXI and 30HXI, and also the Energy boiler range. Condensate can produced acidic residue and therefore needs to be suitably disposed of, helping to maintain the efficiency of the system.
Speedfit offers coil and straight lengths of plastic pipe. All Speedfit pipe contains a 'barrier' that inhibits the ingress of air into the system. Long lengths of plastic pipe creates an easier installation environment with fewer fitting joints required. Always use a Speedfit pipe insert when using Speedfit pipe. To help create a tighter bend than the minimum allowed when the pipe is unsupported.