Gypsum plasterboard with a higher density noise insulating core and a blue paper face for easy recognition. The higher density core design of this board enables the wall, partition and ceiling systems to provide greater sound insulating performance levels over standard products by reducing the transmission of sound between rooms.
This ThermaLine PIR plasterboard from British Gypsum is factory bonded to rigid polyisocyanurate foam for an advanced level of thermal insulation. Both the faces of the insulant are lined with a multi-layer vapour control barrier to reduce the risk of condensation. It is ideal for both refurbishment and new build where a substantial upgrade is required. Provides coverage area of 2.88m2.
Strong, Versatile and good value, Knauf Wallboard is a standard Plasterboard with an ivory paper face ideally suited to receive a plaster finish or for direct decoration. Knauf Plasterboards have a conductivity figure of k = 0.16 W/mK. Knauf Wallboard complies fully with BS EN520 and is categorised as Type A. Available in Square Edge.
Gyproc ThermaLine PIR consists of 12.5mm Gyproc WallBoard binded to CFC and HCFC-free, high performance polyisocyanurate foam with two integral vapour control layers. Designed to be used in both refurbishment and new build for walls, ceiling, room in the roof and window reveals where a high level of cost effective thermal insulation is required to reduce heat loss from buildings as part of our British Gypsum BBA approved systems.
Gypsum plasterboard with a higher density noise insulating core and a blue paper face for easy recognition. The higher density core design of this board enables the wall, partition and ceiling systems to provide greater sound insulating performance levels over standard products by reducing the transmission of sound between rooms.
This ThermaLine PIR plasterboard from British Gypsum is factory bonded to rigid polyisocyanurate foam for an advanced level of thermal insulation. Both the faces of the insulant are lined with a multi-layer vapour control barrier to reduce the risk of condensation. It is ideal for both refurbishment and new build where a substantial upgrade is required. Provides coverage area of 2.88m2.
Strong, Versatile and good value, Knauf Wallboard is a standard Plasterboard with an ivory paper face ideally suited to receive a plaster finish or for direct decoration. Knauf Plasterboards have a conductivity figure of k = 0.16 W/mK. Knauf Wallboard complies fully with BS EN520 and is categorised as Type A. Available in Square Edge.
Gyproc ThermaLine PIR consists of 12.5mm Gyproc WallBoard binded to CFC and HCFC-free, high performance polyisocyanurate foam with two integral vapour control layers. Designed to be used in both refurbishment and new build for walls, ceiling, room in the roof and window reveals where a high level of cost effective thermal insulation is required to reduce heat loss from buildings as part of our British Gypsum BBA approved systems.