Spiral point for immediate start. No pilot hole required
Permeated case with through hardening allows the perfect balance between core ductility and surface toughness with the strength of a high tensile bolt the screw will not snap
Part thread eliminates jacking where a full threaded screw tends to pull apart the jointed material
Collar gives strength to the most vulnerable point of the screw, whilst allowing a deeper recess and less cam-out for a secure drive
Three flats on the thread means that as the screw is driven there is less surface contact between the screw and timber allowing less battery wear, easier insertion and the screw will not work loose as the boards are walked upon
Net-Coat� Green developed for new pressure treated timber and outdoor use
Good screw for decking but rather expensive I needed more and got the exact same ones from a local supplier 500 screws instead of 200 for the same price ☹️
8 years ago
neil
1
0
5
yes
v good
8 years ago
simon
1
0
5
life changing nails
These nails have changed my life no idea how I lived without them before
8 years ago
ian
1
0
3
Not for me.
Not fit for purpose. Sold as decking screws - too short. Overpriced. Had to buy longer screws elsewhere - which were half the price!.
Deck screws from SPAX will provide a strong, firm grip on wooden decks. Easily countersunk into timber, the cylindrical head reduces splitting.
Through 4CUT, SPAX eliminates predrilling, ensuring a fast and secure fastening. The T-STAR Plus head's square end pushes wood fibre aside, reducing screw-in torque.
The 25mm Fibre Cement board screws are perfect fixing method for the 6mm NoMorePly tile backer boards. They have a unique self tapping tip and self-countersinking head. This means they are fast to install and sit completely flush with the surface of the board. The high quality zinc plating means they are suitable for use in wet areas such as bathrooms, wet room and kitchens.
Deck screws from SPAX will provide a strong, firm grip on wooden decks. Easily countersunk into timber, the cylindrical head reduces splitting.
Through 4CUT, SPAX eliminates predrilling, ensuring a fast and secure fastening. The T-STAR Plus head's square end pushes wood fibre aside, reducing screw-in torque.
The 25mm Fibre Cement board screws are perfect fixing method for the 6mm NoMorePly tile backer boards. They have a unique self tapping tip and self-countersinking head. This means they are fast to install and sit completely flush with the surface of the board. The high quality zinc plating means they are suitable for use in wet areas such as bathrooms, wet room and kitchens.