The general purpose trim from Liniar is used for soffit applications. It is a two part trim for hollow soffit and 9mm soffit board to produce clean finished edges. Manufactured in the UK extrusion facility, Liniar foam trims are made from 100 percent lead-free uPVC. It does not require the user to peel the back of the tape or mark the board while cutting.
An Unobtrusive Vent Which Sits Between Two Bricks To Ventilate Cavites And Provide Drainage For Lintels And Cavity Trays. Easy-trim Weep Vents Feature And Angled Grill Which Aids In The Prevention Of Insect Entry And The Ingress Of Wind Driven Rain.
Please note: This item is a plastic component and therefore is not suitable for use within a) the external walls of buildings more than 11m high where people sleep on the premises (residential, institutional or hospitality) or b) external wall surfaces within 1m of the boundary if the building is 11m high or less, in England. For a compliant alternative see Rytons A1 Fire Rated Metal Rytweep Cavity Weep Vent.
Slide And Lock 10mm / 25mm
Over Fascia Vents Featuring Our Unique Slidelock Technology Enabling Rapid Installation With Secure Continual Ventilation. Our Unobtrusive And Easy To Install Fascia Vents Are Available In Two Sizes; 10mm And 25mm. Allows An Air Stream In To The Roof Void Between The Felt And Fascia Board. Pieces Are 500mm With Interlocking Male And Female Ends To Allow For A Continuous Length.
The general purpose trim from Liniar is used for soffit applications. It is a two part trim for hollow soffit and 9mm soffit board to produce clean finished edges. Manufactured in the UK extrusion facility, Liniar foam trims are made from 100 percent lead-free uPVC. It does not require the user to peel the back of the tape or mark the board while cutting.
An Unobtrusive Vent Which Sits Between Two Bricks To Ventilate Cavites And Provide Drainage For Lintels And Cavity Trays. Easy-trim Weep Vents Feature And Angled Grill Which Aids In The Prevention Of Insect Entry And The Ingress Of Wind Driven Rain.
Please note: This item is a plastic component and therefore is not suitable for use within a) the external walls of buildings more than 11m high where people sleep on the premises (residential, institutional or hospitality) or b) external wall surfaces within 1m of the boundary if the building is 11m high or less, in England. For a compliant alternative see Rytons A1 Fire Rated Metal Rytweep Cavity Weep Vent.
Slide And Lock 10mm / 25mm
Over Fascia Vents Featuring Our Unique Slidelock Technology Enabling Rapid Installation With Secure Continual Ventilation. Our Unobtrusive And Easy To Install Fascia Vents Are Available In Two Sizes; 10mm And 25mm. Allows An Air Stream In To The Roof Void Between The Felt And Fascia Board. Pieces Are 500mm With Interlocking Male And Female Ends To Allow For A Continuous Length.