The general purpose trim from Liniar is used for soffit applications. It is a two part trim for hollow soffit and 9mm soffit board to produce clean finished edges. Manufactured in the UK extrusion facility, Liniar foam trims are made from 100 percent lead-free uPVC. It does not require the user to peel the back of the tape or mark the board while cutting.
Slide And Lock 10mm / 25mm
Over Fascia Vents Featuring Our Unique Slidelock Technology Enabling Rapid Installation With Secure Continual Ventilation. Our Unobtrusive And Easy To Install Fascia Vents Are Available In Two Sizes; 10mm And 25mm. Allows An Air Stream In To The Roof Void Between The Felt And Fascia Board. Pieces Are 500mm With Interlocking Male And Female Ends To Allow For A Continuous Length.
An ideal choice for a wide range of roofing applications, the Liniar Fascia corners are suitable for capping and replacement boards. The long corners can be cut into halves to be used in pairs with shorter width boards.
The general purpose trim from Liniar is used for soffit applications. It is a two part trim for hollow soffit and 9mm soffit board to produce clean finished edges. Manufactured in the UK extrusion facility, Liniar foam trims are made from 100 percent lead-free uPVC. It does not require the user to peel the back of the tape or mark the board while cutting.
Slide And Lock 10mm / 25mm
Over Fascia Vents Featuring Our Unique Slidelock Technology Enabling Rapid Installation With Secure Continual Ventilation. Our Unobtrusive And Easy To Install Fascia Vents Are Available In Two Sizes; 10mm And 25mm. Allows An Air Stream In To The Roof Void Between The Felt And Fascia Board. Pieces Are 500mm With Interlocking Male And Female Ends To Allow For A Continuous Length.
An ideal choice for a wide range of roofing applications, the Liniar Fascia corners are suitable for capping and replacement boards. The long corners can be cut into halves to be used in pairs with shorter width boards.