This kit provides the facility to apply outside air temperature control to the boiler water flow temperature which provides energy savings. The outside sensor provided measures outside air temperature and sends a signal to the boiler, which adjusts the maximum boiler flow temperature in response. If outside air temperature is greater than the system design temperature, the boiler flow temperature is reduced providing running cost savings. The boiler will operate in the condensing mode more frequently increasing savings. Once the sensor is fitted it is automatically detected. The sensor operation may be configured by adjustment of the boiler operating parameters, if necessary.
The expansion vessel is a small tank that is used to protect closed water heating systems from pressure surges. The expansion tank is filled with air that acts as a cushion against an increase in pressure within the system.
There are two types of heat exchanger that can be present, the primary heat exchanger and the secondary heat exchanger. The primary is present in almost all boilers and it allows the heat to be transferred from the burner to the water within the system. The secondary heat exchanger is only present in combination boilers and allows the heat to be transferred from one closed system to another. The Primary Heat exchanger is sometimes referred to as the 'main' heat exchanger or heat engine. The secondary heat exchanger can also be known as the domestic hot water heat exchanger or the plate heat exchanger .
There are two types of heat exchanger that can be fitted, the primary heat exchanger and the secondary heat exchanger. The primary is present in almost all boilers and it allows the transfer of heat from the burner to the water within the system. The secondary heat exchanger only appears on combination boilers and allows the heat to be transferred between multiple closed systems. The Primary Heat exchanger is sometimes referred to as the 'main' heat exchanger or heat engine. The secondary heat exchanger can also be known as the domestic hot water heat exchanger or the plate heat exchanger .
This kit provides the facility to apply outside air temperature control to the boiler water flow temperature which provides energy savings. The outside sensor provided measures outside air temperature and sends a signal to the boiler, which adjusts the maximum boiler flow temperature in response. If outside air temperature is greater than the system design temperature, the boiler flow temperature is reduced providing running cost savings. The boiler will operate in the condensing mode more frequently increasing savings. Once the sensor is fitted it is automatically detected. The sensor operation may be configured by adjustment of the boiler operating parameters, if necessary.
The expansion vessel is a small tank that is used to protect closed water heating systems from pressure surges. The expansion tank is filled with air that acts as a cushion against an increase in pressure within the system.
There are two types of heat exchanger that can be present, the primary heat exchanger and the secondary heat exchanger. The primary is present in almost all boilers and it allows the heat to be transferred from the burner to the water within the system. The secondary heat exchanger is only present in combination boilers and allows the heat to be transferred from one closed system to another. The Primary Heat exchanger is sometimes referred to as the 'main' heat exchanger or heat engine. The secondary heat exchanger can also be known as the domestic hot water heat exchanger or the plate heat exchanger .
There are two types of heat exchanger that can be fitted, the primary heat exchanger and the secondary heat exchanger. The primary is present in almost all boilers and it allows the transfer of heat from the burner to the water within the system. The secondary heat exchanger only appears on combination boilers and allows the heat to be transferred between multiple closed systems. The Primary Heat exchanger is sometimes referred to as the 'main' heat exchanger or heat engine. The secondary heat exchanger can also be known as the domestic hot water heat exchanger or the plate heat exchanger .