Living in a hard water area requires you to descale the unit at least twice a year. This is the only product recommended by Saniflo for use in their macerators. I didn't realise this until after four years or so when the unit seemed to overrun which indicates the unit needs descaling as a first step. Prolongs the life of the unit,
3 years ago
Tim
Type of purchase: DIY
Yes, I would recommend to a friend
2
0
5
Great product and great service
Great product - does its job very well! Especially pleased with Travis Perkins' value for money and great delivery service. Highly recommend.
3 years ago
Jo
Type of purchase: DIY
Yes, I would recommend to a friend
0
0
5
Great price
Great product... silly to deliver on a flatbed truck!
3 years ago
Neil
Type of purchase: DIY
Yes, I would recommend to a friend
0
0
5
Yes
Used it before for our saniflo good value for money cheaper than most other places with buy from here again
High quality brass-bodied three-port mid-position motorised valve, for automated control of the flow of hot water to heating or domestic hot water, or both services simultaneously
Automatic Bypass Valve suitable for all heating systems up to 10 bar static pressure where a boiler bypass is required or radiator thermostats are fitted. It provides a simple method of ensuring adequate flow through boilers which require a bypass as well as reducing system noise. In systems fitted with radiator thermostats, the valve opens automatically as the TRVs or zone valves close down and the resistance of the system starts to exceed the preset pressure limit.
The Greenstar Comfort I is an intelligent programmer that plugs into the boiler and is supplied with a separate room thermostat. The thermostat has a load compensation function, which enables the control and the boiler to have an intelligent conversation, delivering a 3% ErP package efficiency increase when fitted with a gas boiler. This control simply plugs into the boiler and comes pre-paired with the room thermostat for a quick installation
The L641 is a water temperature thermostat designed for surface mounting on domestic hot water cylinders, it is supplied complete with mounting strap for rapid and easy installation, so draining of the system or tapping the cylinder is not necessary.
High quality brass-bodied three-port mid-position motorised valve, for automated control of the flow of hot water to heating or domestic hot water, or both services simultaneously
Automatic Bypass Valve suitable for all heating systems up to 10 bar static pressure where a boiler bypass is required or radiator thermostats are fitted. It provides a simple method of ensuring adequate flow through boilers which require a bypass as well as reducing system noise. In systems fitted with radiator thermostats, the valve opens automatically as the TRVs or zone valves close down and the resistance of the system starts to exceed the preset pressure limit.
The Greenstar Comfort I is an intelligent programmer that plugs into the boiler and is supplied with a separate room thermostat. The thermostat has a load compensation function, which enables the control and the boiler to have an intelligent conversation, delivering a 3% ErP package efficiency increase when fitted with a gas boiler. This control simply plugs into the boiler and comes pre-paired with the room thermostat for a quick installation
The L641 is a water temperature thermostat designed for surface mounting on domestic hot water cylinders, it is supplied complete with mounting strap for rapid and easy installation, so draining of the system or tapping the cylinder is not necessary.