A quick drying solution for sealing knots and sap streaks in wood, preventing the resinous sap from bleeding through and damaging and discolouring paint or varnish finishes
Touch dry in 5-10 minutes, recoatable after 30 minutes under normal conditions
Crown Contract water-based satin offers a good quality satin sheen finish for interior wood and correctly primed metal surfaces. A quick drying and low odour alternative to traditional Eggshell, it offers a long lasting, non-yellowing finish which is specified for an elegant look. Covers up to 12 - 15 m2 per litre. For best results apply with a synthetic brush.
Colour Family
Whites
Colour
Brilliant White
Finish
Satin
Size
2.5 L
Application Method
Brush or roller
Interior or Exterior Use
Interior
Coverage per Litre
12m2 - 15m2/litre
Drying Time
1 Hour
Drying time between coats
After 4 hours
Washable
Washable
Clean equipment with
Water Based
Suitable for
Wood, metal
VOC Level
EU limit value for this product (cat.A/d): 130g/l (2010) This product contains max 2g/l
A durable, decorative woodstain for all softwood and hardwood apart from decking or areas subject to heavy wear/abrasion. Suitable for use as a finishing or maintenance coat for exterior joinery, ie: windows, doors and conservatories.
Ronseal Trade Ultra Tough Floor Varnish protects wooden floors by providing long lasting protection against knocks, scuffs and scratches.
Stir thoroughly prior and during use. Apply in a warm well ventilated room. Using a good quality 4" synthetic bristle brush apply evenly in the direction of the wood grain. For best results, apply to 3-4 boards at a time to avoid overlaps. Do not over-brush as this will spread the finish too thinly and effect performance. Apply 3 coats leaving two hours between coats. Prior to application of the final coat, lightly rub down with 240 grade sandpaper, wipe over with a damp cloth and allow to dry.
Sadolin Classic Wood Protection absorbs deeply into the timber to provide exceptional protection against the weather. Suitable as a two coat application for planed or rough sawn timber cladding, decking, fascias, fencing and garden furniture. It is also an ideal base coat for timber joinery to be finished with two coats of Sadolin Extra Durable Woodstain.
Crown Contract water-based satin offers a good quality satin sheen finish for interior wood and correctly primed metal surfaces. A quick drying and low odour alternative to traditional Eggshell, it offers a long lasting, non-yellowing finish which is specified for an elegant look. Covers up to 12 - 15 m2 per litre. For best results apply with a synthetic brush.
A durable, decorative woodstain for all softwood and hardwood apart from decking or areas subject to heavy wear/abrasion. Suitable for use as a finishing or maintenance coat for exterior joinery, ie: windows, doors and conservatories.
Ronseal Trade Ultra Tough Floor Varnish protects wooden floors by providing long lasting protection against knocks, scuffs and scratches.
Stir thoroughly prior and during use. Apply in a warm well ventilated room. Using a good quality 4" synthetic bristle brush apply evenly in the direction of the wood grain. For best results, apply to 3-4 boards at a time to avoid overlaps. Do not over-brush as this will spread the finish too thinly and effect performance. Apply 3 coats leaving two hours between coats. Prior to application of the final coat, lightly rub down with 240 grade sandpaper, wipe over with a damp cloth and allow to dry.
Sadolin Classic Wood Protection absorbs deeply into the timber to provide exceptional protection against the weather. Suitable as a two coat application for planed or rough sawn timber cladding, decking, fascias, fencing and garden furniture. It is also an ideal base coat for timber joinery to be finished with two coats of Sadolin Extra Durable Woodstain.