High quality PlumbRight lever ball valve with a blue handle to indicate cold water supply, Compression ends manufactured to BS EN 1252-3 and WRAS approved. Lever ball valves enables an easy adjustment of the water flow where being parallel to the pipe will allows a full flow through the valve, adjusting to be perpendicular to the pipe will block the flow of water. Moving the lever between 0 and 90 degrees controls the flow. (Avaliable in red, blue and yellow).
The valve as supplied is fitted with high pressure restrictor seat as standard (white), the valve is also accompanied by a low pressure restrictor seat (red) attached to the float arm.
Speedfit push-fit valve for the connection of plastic and copper pipe. A must for any dwelling. The valve allows the user to stop the flow of water to a fixture by the ¼ turn of a screw, in case of emergency or repair. Simply push the valve fully onto the pipe. Should the need arise to demount the connection push the collet towards the body of the fitting and pull the pipe to release. Installation can be reduced by around 40% against traditional fixing methods. Not suitable for central heating systems. Designed, manufactured and assembled in the UK by John Guest Speedfit.
Valves are manufactured in modified PVCu and are extremely durable and designed to provide secure solvent weld jointing. PVC-C provides superior fire performance and its high softening point means it is not adversely affected by very hot water discharges.
High quality PlumbRight lever ball valve with a blue handle to indicate cold water supply, Compression ends manufactured to BS EN 1252-3 and WRAS approved. Lever ball valves enables an easy adjustment of the water flow where being parallel to the pipe will allows a full flow through the valve, adjusting to be perpendicular to the pipe will block the flow of water. Moving the lever between 0 and 90 degrees controls the flow. (Avaliable in red, blue and yellow).
The valve as supplied is fitted with high pressure restrictor seat as standard (white), the valve is also accompanied by a low pressure restrictor seat (red) attached to the float arm.
Speedfit push-fit valve for the connection of plastic and copper pipe. A must for any dwelling. The valve allows the user to stop the flow of water to a fixture by the ¼ turn of a screw, in case of emergency or repair. Simply push the valve fully onto the pipe. Should the need arise to demount the connection push the collet towards the body of the fitting and pull the pipe to release. Installation can be reduced by around 40% against traditional fixing methods. Not suitable for central heating systems. Designed, manufactured and assembled in the UK by John Guest Speedfit.
Valves are manufactured in modified PVCu and are extremely durable and designed to provide secure solvent weld jointing. PVC-C provides superior fire performance and its high softening point means it is not adversely affected by very hot water discharges.