Surestop Remote Water Stopcock 15mm SS/15/RPL

The Intaball gas range of full bore lever operation ball valves is ideal for general gas purpose applications, available with yellow handle.

High quality PlumbRight lever ball valve with a red handle to indicate hot water supply, Compression ends manufactured to BS EN 1252-3 and WRAS approved. Lever ball valves enables an easy adjustment of the water flow where being parallel to the pipe will allows a full flow through the valve, adjusting to be perpendicular to the pipe will block the flow of water. Moving the lever between 0 and 90 degrees controls the flow. (Avalible in red, blue & yellow).

The Altecnic pressure reducing valve has been designed to provide complete control of inlet pressures up to 12 bar. It covers the use of hot or cold water for domestic and semi commercial applications and is WRAS approved.

Speedfit push-fit plastic fitting for the connection of plastic and copper pipe. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. Installation can be reduced by around 40% against traditional fixing methods. Note: with all plastic pipes the relevant manufacturer’s pipe insert is required. Designed, manufactured and assembled in the UK by John Guest Speedfit.