Free Click & Collect
Within One Hour
Delivery address
Collection branch
Ideas & Advice
VAT
EX
INC
Knauf Dritherm Cavity Slab 32 125mm 455 x 1200mm 2.184m2 Per Pack
Hover Over to Zoom In
Overview
- Made with a water-repellent additive to resist moisture ingress.
- Holds an Agrément certificate by the BBA for use in all exposure zones, including those in very severe areas.
- Engineered to adapt to any slight imperfections in the substrate and knit together, eliminating any air gaps and preserving thermal performance for the lifetime of the building.
- Friction fits between wall ties, so there is no need for ancillary products, such as retaining discs or jointing tape.
- Full-fill solution that doesn't require cavity barriers.
- Holds a CCPI Verification Mark (certificate number 000600006/0426) for the entire product set
Technical specification
Weight
9.556 kg
Length
1200 mm
Thickness
125 mm
Width
455 mm
Material
Glass Mineral Wool
Usage
Masonry Cavity Walls
Coverage
2.184 m2
Thermal Conductivity
0.032 W/mK
Pack Quantity
4
Type
DriTherm Cavity Slab 32
Range Description
Cavity Wall Insulation
Manufacturer Model No
715829
CCPI verification number
000600006/0925
Brand Name
Knauf Insulation
Data sheets
Reviews
Be the first to review this product.
Knauf Insulation Rocksilk RS45 50mm 7.20m2
An A1 Non-Combustible Rock Mineral Wool slab, manufactured using Knauf Insulation's unique ECOSE® Technology and designed for use in multiple applications including internal partitions, timber and metal studs, and in between timber rafters and floor joists.
£77.00 per pack (Inc. VAT)
Knauf Acoustic Roll Ready Cut 100mm 10.30m 3 x 400 12.36m2 Per Pack
Acoustic Roll is a glass mineral wool roll, designed for use in internal wall and floor applications, offering sound absorption and noise reduction properties. It is non-combustible with the best possible Euroclass A1 reaction to fire classification, and is manufactured using our unique plant-based binder, ECOSE® Technology.
£118.19 per pack (Inc. VAT)
Actis Hybris Panels 125mm 2 Pack 2.74m2
Is made of shaped polyethylene foams glued to aluminium coated polyethylene foils. The unique honeycomb structure composes of a large number of low emissivity cavities that ensure high thermal performance. The reflective insulation product has a heat capacity of 2300JK/kgK. The panels can be used on timber frame, masonry walls, pitched roof, ceilings, floors & suspended timber floors. The lightweight Hybris panels have a tensile strength greater than 45kPa before and after ageing in both longitudinal and transversal directions. The tensile strength is tested to EN 1608 and the tearing and nail shank resistance to EN 12310- 1 part 1.
£49.93 per pack (Inc. VAT)
Rockwool Ablative Coated Batt 50mm x 1200mm x 600mm 0.72m2/ Pack
Rockwool Ablative Coated Batt is a specially designed insulation batt that acts as an air seal barrier whilst reinforcing fire resistance and acoustic performance of concrete floors, masonry walls and drylining systems. Its unique design means it has outstanding fire performance of up to 4 hours, whilst remaining lightweight enough to ensure easy installation. This product has been tested for its airtightness performance and requires no maintenance once installed. This comes in a pack of 1.
£35.23 each (Inc. VAT)