Is made of shaped polyethylene foams glued to aluminium coated polyethylene foils. The unique honeycomb structure composes of a large number of low emissivity cavities that ensure high thermal performance. The reflective insulation product has a heat capacity of 2300JK/kgK. The panels can be used on timber frame, masonry walls, pitched roof, ceilings, floors & suspended timber floors. The lightweight Hybris panels have a tensile strength greater than 45kPa before and after ageing in both longitudinal and transversal directions. The tensile strength is tested to EN 1608 and the tearing and nail shank resistance to EN 12310- 1 part 1.
Rockwool Ablative Coated Batt is a specially designed insulation batt that acts as an air seal barrier whilst reinforcing fire resistance and acoustic performance of concrete floors, masonry walls and drylining systems. Its unique design means it has outstanding fire performance of up to 4 hours, whilst remaining lightweight enough to ensure easy installation. This product has been tested for its airtightness performance and requires no maintenance once installed. This comes in a pack of 1.
12mm 100 x 10,000 rolls of Brickfill closed cell cross linked polyethylene foams for all your requirements for brick and blockwork expansion and movement joints packed in 10 rolls per merchant pack.
Thermaclass Cavity Wall 21 is an easy to install, polyisocyanurate (PIR) insulation board for full fill cavity wall applications, with excellent thermal performance (0.021 W/m.K). Featuring a low emissivity foil facing, it can be installed with up to a 10mm residual cavity (to support ease of installation and accommodate mortar squeeze) or as a full fill solution with no residual cavity.
Is made of shaped polyethylene foams glued to aluminium coated polyethylene foils. The unique honeycomb structure composes of a large number of low emissivity cavities that ensure high thermal performance. The reflective insulation product has a heat capacity of 2300JK/kgK. The panels can be used on timber frame, masonry walls, pitched roof, ceilings, floors & suspended timber floors. The lightweight Hybris panels have a tensile strength greater than 45kPa before and after ageing in both longitudinal and transversal directions. The tensile strength is tested to EN 1608 and the tearing and nail shank resistance to EN 12310- 1 part 1.
Rockwool Ablative Coated Batt is a specially designed insulation batt that acts as an air seal barrier whilst reinforcing fire resistance and acoustic performance of concrete floors, masonry walls and drylining systems. Its unique design means it has outstanding fire performance of up to 4 hours, whilst remaining lightweight enough to ensure easy installation. This product has been tested for its airtightness performance and requires no maintenance once installed. This comes in a pack of 1.
12mm 100 x 10,000 rolls of Brickfill closed cell cross linked polyethylene foams for all your requirements for brick and blockwork expansion and movement joints packed in 10 rolls per merchant pack.
Thermaclass Cavity Wall 21 is an easy to install, polyisocyanurate (PIR) insulation board for full fill cavity wall applications, with excellent thermal performance (0.021 W/m.K). Featuring a low emissivity foil facing, it can be installed with up to a 10mm residual cavity (to support ease of installation and accommodate mortar squeeze) or as a full fill solution with no residual cavity.