H+HÕs Celcon Blocks High Strength Grade (7.3N/mm2 Ð identified with a black stripe on the block) is ideal where higher compressive strengths are required such as in the foundations and lower storeys of three storey buildings, piers under high vertical loads and in multi-storey buildings.
IKO Hyload Original Damp-proof Course system is a flexible polymeric sheet material, used within masonry walls to prevent passage of moisture from the ground and at all levels as cavity tray to prevent the downward movement of water.Trusted for over 40 years, Hyload Original is the UK’s leading High Performance DPC
The expansion joint roll from Fillcrete Brickfill consists of cross linked polyethylene foams suitable for brick and blockwork expansion and movement joints. It is handy and lightweight. 10 rolls per pack.
EcoTherm Eco-Deck comprises a fibre free rigid polyisocyanurate (PIR) insulation core, faced with an aluminium foil composite on both sides, bonded to 6mm exterior grade plywood on one side.
H+HÕs Celcon Blocks High Strength Grade (7.3N/mm2 Ð identified with a black stripe on the block) is ideal where higher compressive strengths are required such as in the foundations and lower storeys of three storey buildings, piers under high vertical loads and in multi-storey buildings.
IKO Hyload Original Damp-proof Course system is a flexible polymeric sheet material, used within masonry walls to prevent passage of moisture from the ground and at all levels as cavity tray to prevent the downward movement of water.Trusted for over 40 years, Hyload Original is the UK’s leading High Performance DPC
The expansion joint roll from Fillcrete Brickfill consists of cross linked polyethylene foams suitable for brick and blockwork expansion and movement joints. It is handy and lightweight. 10 rolls per pack.
EcoTherm Eco-Deck comprises a fibre free rigid polyisocyanurate (PIR) insulation core, faced with an aluminium foil composite on both sides, bonded to 6mm exterior grade plywood on one side.