Excellent thermal performance with a thermal conductivity of 0.022 W/m.K, reducing the thickness of insulation required to hit the target U-value.
Low emissivity foil facing provides improved thermal performance in sealed cavity air spaces, improving the achievable U-value.
Celotex boards are light and rigid assisting with ease of transportation, handling and fitting.
Celotex GA4000 has been assessed by the BBA as fit for use in defined roof, wall and floor applications if installed, used and maintained as set out in the certificate. Please read the certification at insulation-UK.com/
BBA for full details and restrictions.
To ensure we are providing you with the most up to date information available please visit our Manufacturer Technical Information page
Technical specification
Made To Order
N
Manufacturer Model No
GA4100
Brand Name
Celotex
Range Description
Insulation Board
Length
2400 mm
Thickness
100 mm
Width
1200 mm
Material
PIR
Coverage
2.88 m2
Thermal Conductivity
0.022 W/mK
Certifications Met
BBA Certificate Number 16/5352
BBA Certificate Number 17/5405
Good quality and good value. Used it to insulate the ceiling in our summer room.
2 months ago
Saz from North East
Yes, I would recommend to a friend
0
0
5
Insulation for roof space
Just what I needed yo insulate my small loft space. Not difficult to use...a bit messy. Need eye and mouth protection!
Having never done anything like this it was a job fairly easily accomplished with basic tools.
9 months ago
sue
Type of purchase: DIY
Yes, I would recommend to a friend
1
0
5
As expected
As expected.
10 months ago
Amanda
Type of purchase: DIY
Yes, I would recommend to a friend
0
0
5
Great insulation
Lovely insulation for my garage conversion floor, easy to cut and keeps the building control happy, just a shame I then had to bury it under a DPM and the. a concrete screed, never to be seen again! Good service for TP.
Is made of shaped polyethylene foams glued to aluminium coated polyethylene foils. The unique honeycomb structure composes of a large number of low emissivity cavities that ensure high thermal performance. The reflective insulation product has a heat capacity of 2300JK/kgK. The panels can be used on timber frame, masonry walls, pitched roof, ceilings, floors & suspended timber floors. The lightweight Hybris panels have a tensile strength greater than 45kPa before and after ageing in both longitudinal and transversal directions. The tensile strength is tested to EN 1608 and the tearing and nail shank resistance to EN 12310- 1 part 1.
Is made of shaped polyethylene foams glued to aluminium coated polyethylene foils. The unique honeycomb structure composes of a large number of low emissivity cavities that ensure high thermal performance. The reflective insulation product has a heat capacity of 2300JK/kgK. The panels can be used on timber frame, masonry walls, pitched roof, ceilings, floors & suspended timber floors. The lightweight Hybris panels have a tensile strength greater than 45kPa before and after ageing in both longitudinal and transversal directions. The tensile strength is tested to EN 1608 and the tearing and nail shank resistance to EN 12310- 1 part 1.
Kingspan Kooltherm K108 Cavity Insulation Board with a fibre-free rigid thermoset phenolic core is suitable for partial fill cavity wall insulations. This product is ideal for both residential and industrial applications. It is unaffected by air infiltration and provides a coverage of 3.24m2.
With a fibre free rigid thermoset phenolic core, Kingspan Kooltherm K112 Framing Board is a rigid insulation material making it an ideal choice for both timber frame and steel frame wall construction. Provides coverage area of 17.28m2.
Is made of shaped polyethylene foams glued to aluminium coated polyethylene foils. The unique honeycomb structure composes of a large number of low emissivity cavities that ensure high thermal performance. The reflective insulation product has a heat capacity of 2300JK/kgK. The panels can be used on timber frame, masonry walls, pitched roof, ceilings, floors & suspended timber floors. The lightweight Hybris panels have a tensile strength greater than 45kPa before and after ageing in both longitudinal and transversal directions. The tensile strength is tested to EN 1608 and the tearing and nail shank resistance to EN 12310- 1 part 1.
Is made of shaped polyethylene foams glued to aluminium coated polyethylene foils. The unique honeycomb structure composes of a large number of low emissivity cavities that ensure high thermal performance. The reflective insulation product has a heat capacity of 2300JK/kgK. The panels can be used on timber frame, masonry walls, pitched roof, ceilings, floors & suspended timber floors. The lightweight Hybris panels have a tensile strength greater than 45kPa before and after ageing in both longitudinal and transversal directions. The tensile strength is tested to EN 1608 and the tearing and nail shank resistance to EN 12310- 1 part 1.
Kingspan Kooltherm K108 Cavity Insulation Board with a fibre-free rigid thermoset phenolic core is suitable for partial fill cavity wall insulations. This product is ideal for both residential and industrial applications. It is unaffected by air infiltration and provides a coverage of 3.24m2.
With a fibre free rigid thermoset phenolic core, Kingspan Kooltherm K112 Framing Board is a rigid insulation material making it an ideal choice for both timber frame and steel frame wall construction. Provides coverage area of 17.28m2.