Delivery address
Collection branch

Sika Frosterproofer 1L

329933
Sika Frosterproofer 1L
Sika Frosterproofer 1L
Hover Over to Zoom In
Sika Frosterproofer 1L
Sika Frosterproofer 1L

Overview

  • Concentrate admixture
  • Measured dosing system
  • Economic in use
  • Protects down to -2°C Air Temperature
  • Spill proof bottle
  • Equivalent to 5 Litres of conventional frostproofer
  • It can be used in all situations where reduced setting time is required
  • 1 litre treats up to 100kg of cement

Technical specification

Size
1 L
Colour
Straw
Pack Quantity
1
Type
Frostproofer
Brand Name
Sika
Manufacturer Model No
170378

Reviews

Be the first to review this product.
Retail price

£18.90

each
£15.75 ex. vat
Trade price
£17.96
Inc. VAT
Save with a Trade account
Enter postcode for local availability
Select collection branch for local availability
Please enter your delivery postcode...
Please select your collection branch...

Related products

Kit contains: x1 Dryrod 50 Box x1 Dryzone System Hole Clearing Tool - x1 Dryzone System Rod Cutting Tool- x1 Dryzone Drill Bit - 12mm x 300mm - x1 Stormdry Xr Mortar - No fuss, no mess, no stress. Dryrod is the next generation of rising damp treatment developed by Safeguard Europe Ltd. The patented, BBA approved 12mm diameter DIY damp proofing rods carry a powerful water repellent material, which cures to form a powerful barrier to rising damp. Once they are inserted, the rods will start to dry out the wall by slowly diffusing water repellent deep into the damp masonry, curing to form a powerful barrier to further rising damp. Installation: Simply insert the 9" rods into a series of 12mm holes drilled into the lowest available continuous mortar course of the wall. No specialist pumps or mastic guns required. A normal hammer drill will suffice. Once installed they diffuse the active ingredient deep into the wall before it cures to form a water-repellent chemical damp course. Advantages over other methods: The most effective rising damp treatment available - Proven to work even up to 95% saturation Quick & easy to install DIY rising damp treatment - Simply drill holes & insert the damp-proofing rods to form a new chemical damp course. No mess to clean up - The active ingredient is contained within the rods so there's no chance of messy spillages that occur with other solutions for damp proofing for walls.
Size
6m
Interior or Exterior Use
Interior
Coverage per Litre
10 m on 9" wall = 84 Rods
Drying Time
N/A
Time to Full Cure
1 month
VOC Level
Minimal 0-0.29%
Colour
White
Type
Damp-Proof Rods
Manufacturer Model No
AM-DRYROD KIT 6M
Brand Name
Dryzone

£148.32

each (Inc. VAT)
Loading...
Loading...
5 (5 reviews)
Dryzone is a special damp proofing cream that is introduced along the mortar course at regular intervals by injecting it into pre-drilled holes. The Dryzone then diffuses before curing to form a continuous water repellent barrier. This prevents the damp from rising up the wall.
Size
600 ml
Brand Name
Dryzone

£221.76

per box (Inc. VAT)
Loading...
Loading...
Sovereign WeatherChek Façade Cream is an easy-to-use water repellent for protecting external masonry from penetrating damp and freeze-thaw damage. The viscous emulsion of silane and siloxanes penetrates and impregnates porous masonry to produce a water-repellent surface. WeatherChek Façade Cream can be applied with a spray, brush or roller to porous masonry such as brick, mortar, render, limestone and sandstone. Reducing the porosity of masonry also results in reduced heat transfer, improving the thermal properties of a dwelling. WeatherChek Façade Cream also does not prevent a wall from breathing.
Size
5 L
Coverage per Litre
4-8m²
Drying Time
24 Hours
Colour
Clear
Type
Façade Cream Water Repellent
Interior or Exterior Use
Exterior Use
Certifications Met
None
Brand Name
Sovereign

£171.90

each (Inc. VAT)
Loading...
Loading...
A high-performance cementitious waterproofing system designed for basements, cellars, and other below-ground structures that can withstand up to 5-bar water pressure. Supplied as a two-part kit with pre-measured cementitious powder and liquid polymer components, it produces a dense, durable slurry tested to withstand up to 5 bar hydrostatic water pressure (equivalent to 50 metres below ground). The polymer additive improves workability, bond strength and flexibility, making the kit suitable for internal tanking in both new-build and retrofit settings. Once mixed, it can be applied to damp masonry and concrete walls and floors using a trowel or brush in two coats. Ideal for areas prone to movement or salt efflorescence. Compliant with BS 8102:2022 as a Type A barrier system.
Size
12kg
Interior or Exterior Use
Interior
Coverage per Litre
Pressureless water: 3.5 – 4.5 kg/m², water under pressure: 3.5 – 5.5 kg/m²
Drying Time
2 - 4 hours
Time to Full Cure
7 - 14 days
VOC Level
Minimal 0-0.29%
Colour
Grey
Type
Tanking Slurry
Manufacturer Model No
FG-A00174-001
Brand Name
Drybase

£50.46

each (Inc. VAT)
Loading...
Loading...
Safeguard Dryrod Damp Proofing Rods Kit 6M BBA Approved
Safeguard Dryrod Damp Proofing Rods Kit 6M BBA Approved
Kit contains: x1 Dryrod 50 Box x1 Dryzone System Hole Clearing Tool - x1 Dryzone System Rod Cutting Tool- x1 Dryzone Drill Bit - 12mm x 300mm - x1 Stormdry Xr Mortar - No fuss, no mess, no stress. Dryrod is the next generation of rising damp treatment developed by Safeguard Europe Ltd. The patented, BBA approved 12mm diameter DIY damp proofing rods carry a powerful water repellent material, which cures to form a powerful barrier to rising damp. Once they are inserted, the rods will start to dry out the wall by slowly diffusing water repellent deep into the damp masonry, curing to form a powerful barrier to further rising damp. Installation: Simply insert the 9" rods into a series of 12mm holes drilled into the lowest available continuous mortar course of the wall. No specialist pumps or mastic guns required. A normal hammer drill will suffice. Once installed they diffuse the active ingredient deep into the wall before it cures to form a water-repellent chemical damp course. Advantages over other methods: The most effective rising damp treatment available - Proven to work even up to 95% saturation Quick & easy to install DIY rising damp treatment - Simply drill holes & insert the damp-proofing rods to form a new chemical damp course. No mess to clean up - The active ingredient is contained within the rods so there's no chance of messy spillages that occur with other solutions for damp proofing for walls.
£148.32 each (Inc. VAT)
Dryzone Targeted Treatment Damp ProCourse Cream - Box 10
Dryzone Targeted Treatment Damp ProCourse Cream - Box 10
Dryzone is a special damp proofing cream that is introduced along the mortar course at regular intervals by injecting it into pre-drilled holes. The Dryzone then diffuses before curing to form a continuous water repellent barrier. This prevents the damp from rising up the wall.
£221.76 per box (Inc. VAT)
Sovereign Weatherchek FAÇADE Cream 5L
Sovereign Weatherchek FAÇADE Cream 5L
Sovereign WeatherChek Façade Cream is an easy-to-use water repellent for protecting external masonry from penetrating damp and freeze-thaw damage. The viscous emulsion of silane and siloxanes penetrates and impregnates porous masonry to produce a water-repellent surface. WeatherChek Façade Cream can be applied with a spray, brush or roller to porous masonry such as brick, mortar, render, limestone and sandstone. Reducing the porosity of masonry also results in reduced heat transfer, improving the thermal properties of a dwelling. WeatherChek Façade Cream also does not prevent a wall from breathing.
£171.90 each (Inc. VAT)
Safeguard Drybase TS-Plus Polymer Tanking Kit 12kg
Safeguard Drybase TS-Plus Polymer Tanking Kit 12kg
A high-performance cementitious waterproofing system designed for basements, cellars, and other below-ground structures that can withstand up to 5-bar water pressure. Supplied as a two-part kit with pre-measured cementitious powder and liquid polymer components, it produces a dense, durable slurry tested to withstand up to 5 bar hydrostatic water pressure (equivalent to 50 metres below ground). The polymer additive improves workability, bond strength and flexibility, making the kit suitable for internal tanking in both new-build and retrofit settings. Once mixed, it can be applied to damp masonry and concrete walls and floors using a trowel or brush in two coats. Ideal for areas prone to movement or salt efflorescence. Compliant with BS 8102:2022 as a Type A barrier system.
£50.46 each (Inc. VAT)