Free Click & Collect
Within One Hour
Delivery address
Collection branch
Ideas & Advice
VAT
EX
INC
Safeguard Drybase TS-Plus 5-bar Waterproofer 4L
Hover Over to Zoom In
Overview
- Provides robust internal and external waterproofing for concrete, masonry, basements and retaining walls
- Resists up to 5 bar hydrostatic pressure - ideal for foundations, slabs and below-ground structures
- Enhances workability and bond strength for reliable application in demanding conditions
- Conforms to BS 8102:2022 for Type A waterproofing of shallow basement structures
- Resists salt efflorescence and is suitable for substrates prone to movement or cracking
- Easy to apply by trowel, brush or spray on horizontal and vertical surfaces
Technical specification
Size
4 Litres
Interior or Exterior Use
Interior
Drying Time
N/A
VOC Level
Minimal 0-0.29%
Colour
White
Type
Styrene Butadiene Rubber
Manufacturer Model No
FG-A00113-001
Brand Name
Drybase
Data sheets
Reviews
Be the first to review this product.
NEW
Stormdry XR-Mortar is a semi-flexible polymer modified crack filling mortar for masonry. It can be used to seal cracks in bricks and masonry joints to prevent rain penetration or to repoint damaged areas of pointing in both internal and external environments. It is applied directly to the damaged area using a cartridge gun and nozzle to provide a waterproof barrier. It can also be used to plug damp proof course holes.
£22.31 each (Inc. VAT)
NEW
Kit contains: x1 Dryrod 50 Box x1 Dryzone System Hole Clearing Tool - x1 Dryzone System Rod Cutting Tool- x1 Dryzone Drill Bit - 12mm x 300mm - x1 Stormdry Xr Mortar - No fuss, no mess, no stress. Dryrod is the next generation of rising damp treatment developed by Safeguard Europe Ltd. The patented, BBA approved 12mm diameter DIY damp proofing rods carry a powerful water repellent material, which cures to form a powerful barrier to rising damp. Once they are inserted, the rods will start to dry out the wall by slowly diffusing water repellent deep into the damp masonry, curing to form a powerful barrier to further rising damp. Installation: Simply insert the 9" rods into a series of 12mm holes drilled into the lowest available continuous mortar course of the wall. No specialist pumps or mastic guns required. A normal hammer drill will suffice. Once installed they diffuse the active ingredient deep into the wall before it cures to form a water-repellent chemical damp course. Advantages over other methods: The most effective rising damp treatment available - Proven to work even up to 95% saturation Quick & easy to install DIY rising damp treatment - Simply drill holes & insert the damp-proofing rods to form a new chemical damp course. No mess to clean up - The active ingredient is contained within the rods so there's no chance of messy spillages that occur with other solutions for damp proofing for walls.
£148.32 each (Inc. VAT)
Dryzone Targeted Treatment Damp ProCourse Cream - Box 10
Dryzone is a special damp proofing cream that is introduced along the mortar course at regular intervals by injecting it into pre-drilled holes. The Dryzone then diffuses before curing to form a continuous water repellent barrier. This prevents the damp from rising up the wall.
£221.76 per box (Inc. VAT)
NEW
Sovereign FungiChek Mould Eradication Additive is added to emulsion paints to prevent black mould from growing on internal surfaces. It can also be added to wallpaper paste. For larger or very severe outbreaks, FungiChek ready mixed paints are available.
£14.78 each (Inc. VAT)