Free Click & Collect
Within One Hour
Delivery address
Collection branch
Ideas & Advice
VAT
EX
INC
Safeguard Dryrod Damp Proofing Rods Kit 6M BBA Approved
Hover Over to Zoom In
Frequently bought together
Overview
- Dryrod Damp-Proofing Rods Next Generation DPC - The most effective form of damp proofing for walls; outperforms creams, gels or liquids. BBA approved.
- Fast & Simple to Install DIY rising damp treatment. Less messy than older traditional damp course injection creams or liquids
- No specialist equipment required - simply insert into 12mm holes in the mortar lines of a building to form a powerful waterproof barrier
- Exact Dosage - Delivers the correct dose every time eliminating guesswork
- BBA Approved: The High-Performance DPC Treatment is Certified by the British Board of Agriment to be effective against the ingress of moisture for at least 20 years
- Effective in both new (alkaline) and old (neutral) mortar
Technical specification
Size
6m
Interior or Exterior Use
Interior
Coverage per Litre
10 m on 9" wall = 84 Rods
Drying Time
N/A
Time to Full Cure
1 month
VOC Level
Minimal 0-0.29%
Colour
White
Type
Damp-Proof Rods
Manufacturer Model No
AM-DRYROD KIT 6M
Brand Name
Safeguard
Data sheets
Reviews
Be the first to review this product.
Safeguard Drybase Tanking Slurry Bba 25 Kg
Drybase Tanking Slurry is a cementitious, ready-mixed surface waterproofer. The waterproofing function is achieved by a unique composition of cement, graded quartz sand and selected additives. It can be used against active and passive water pressures. The initial and final bonding capability of Drybase Tanking Slurry is excellent, making it suitable to be applied to horizontal as well as vertical surfaces. It is durable, resistant to frost and heat after setting, but also permeable to vapour. Drybase Tanking Slurry is tested for use in contact with drinking water.
£59.06 each (Inc. VAT)
Safeguard Drybase TS-Plus Tanking Slurry 20kg
Drybase Tanking Slurry is a cementitious, ready-mixed surface waterproofer. The waterproofing function is achieved by a unique composition of cement, graded quartz sand and selected additives. It can be used against active and passive water pressures. The initial and final bonding capability of Drybase Tanking Slurry is excellent, making it suitable to be applied to horizontal as well as vertical surfaces. It is durable, resistant to frost and heat after setting, but also permeable to vapour. Drybase Tanking Slurry is tested for use in contact with drinking water.
£30.73 each (Inc. VAT)
Safeguard Dryzone Anti-mould Paint Additive 100ml
Dryzone Anti-Mould Additive is a highly-effective biocidal additive liquid. It imparts paints, wallpaper pastes and tile grouts with mould-resistant properties. The special biocidal formula of the additive will resist the growth of mould in areas of persistent condensation for up to five years.
£9.08 each (Inc. VAT)
Safeguard Drybase Construction Joint Tape 180mm X 30m
Drybase Construction Joint Tape is a synthetic rubber strip, approximately 0.7 mm thick. It is covered on both sides with an alkaliresistant and flexible polyester fabric mat, which forms a web on the edges. The combined properties of the fabric mat and synthetic rubber ensure a strong bond with the concrete surface, maintaining excellent elasticity of the tape.
£103.38 each (Inc. VAT)