Hydralime may be used with Procem, Mastercrete, General Purpose Cement, Snowcrete and Sulfacrete. Hydralime improves the cohesion, workability, plasticity and long term durability of Mortars and Renders when used. Note that as Hydralime is non-hydraulic, it is not suitable for use in mortars and renders without a Portland cement.
Sulfacrete is particularly suitable for reducing damage to concrete, mortar and grout exposed to sulphate attack and minimising the risk of alkali silica reaction, reducing the thermally-induced stresses in large pours, concrete exposed to the marine environment. Sulfacrete is a low-alkali Portland-fly ash cement that conforms to the requirements of BS EN 197-1 CEM II/B-V 32,5R. This cement is classified by BS 8500 with a +SR suffix, signifying enhanced sulphate resistance.
Pre-mixed and ready to use with the addition of clean water, M4 (designation III) 1:1:6 cement:hydrated lime:sand mortar. Comprising specially graded sand, lime and admixtures this Blue Circle mortar offers convenience, with no compromise in performance or quality. Weather resistant and durable, this mortar is suitable for most general brick and block applications. Also ideal for pointing or gable ends. The mix is highly workable and cohesive, with a long board life.
A Portland cement containing calcium aluminate to Extra Rapid gives rapid hardening and setting properties for repair and maintenance where rapid hardening is required, eg, setting manholes, repairs to paths and steps, Suitable for concrete, mortar, rendering and floor screeds. Extra Rapid takes foot traffic in 4-6 hours and vehicular traffic in 8-12 hours.
Hydralime may be used with Procem, Mastercrete, General Purpose Cement, Snowcrete and Sulfacrete. Hydralime improves the cohesion, workability, plasticity and long term durability of Mortars and Renders when used. Note that as Hydralime is non-hydraulic, it is not suitable for use in mortars and renders without a Portland cement.
Sulfacrete is particularly suitable for reducing damage to concrete, mortar and grout exposed to sulphate attack and minimising the risk of alkali silica reaction, reducing the thermally-induced stresses in large pours, concrete exposed to the marine environment. Sulfacrete is a low-alkali Portland-fly ash cement that conforms to the requirements of BS EN 197-1 CEM II/B-V 32,5R. This cement is classified by BS 8500 with a +SR suffix, signifying enhanced sulphate resistance.
Pre-mixed and ready to use with the addition of clean water, M4 (designation III) 1:1:6 cement:hydrated lime:sand mortar. Comprising specially graded sand, lime and admixtures this Blue Circle mortar offers convenience, with no compromise in performance or quality. Weather resistant and durable, this mortar is suitable for most general brick and block applications. Also ideal for pointing or gable ends. The mix is highly workable and cohesive, with a long board life.
A Portland cement containing calcium aluminate to Extra Rapid gives rapid hardening and setting properties for repair and maintenance where rapid hardening is required, eg, setting manholes, repairs to paths and steps, Suitable for concrete, mortar, rendering and floor screeds. Extra Rapid takes foot traffic in 4-6 hours and vehicular traffic in 8-12 hours.