I've bought this previously several times from the Cleator Moor depot and never had issues with it, perfect mix every time.
just a shame the Cumbrian branches have stopped using this brand and moved to one that's not quite as good.
Sulfacrete is particularly suitable for reducing damage to concrete, mortar and grout exposed to sulphate attack and minimising the risk of alkali silica reaction, reducing the thermally-induced stresses in large pours, concrete exposed to the marine environment. Sulfacrete is a low-alkali Portland-fly ash cement that conforms to the requirements of BS EN 197-1 CEM II/B-V 32,5R. This cement is classified by BS 8500 with a +SR suffix, signifying enhanced sulphate resistance.
A Portland cement containing calcium aluminate to Extra Rapid gives rapid hardening and setting properties for repair and maintenance where rapid hardening is required, eg, setting manholes, repairs to paths and steps, Suitable for concrete, mortar, rendering and floor screeds. Extra Rapid takes foot traffic in 4-6 hours and vehicular traffic in 8-12 hours.
Sovereign Hey’di Barrier Mortar is a hydrophobic, non-shrinking repair mortar. It is an integral part of the Sovereign Hey’di K11 tanking system, used to create a fillet at wall/wall and wall/floor junctures. Hey’di Barrier Mortar forms a water-resistant mortar that does not shrink, and has excellent adhesion to concrete and mortar. It can be used as a general repair mortar where shrinkage needs to be avoided. Hey’di Barrier Mortar has a long pot life of up to 5 hours, ensuring that waste is kept to a minimum.
Suitable for
Forming fillets at wall/wall and wall/floor junctions; non-shrink masonry repairs; part of Sovereign Hey’di K11 Tanking System
Interior or Exterior Use
Interior or Exterior Use
Application Method
Trowel
Drying Time
2-3 Hours (Depending on Thickness, Ambient Temperature and Humidity)
Time to Full Cure
2-3 Hours (Depending on Thickness, Ambient Temperature and Humidity)
Mastercrete contains cement quality improver to give the following benefits compared with ordinary Portland cement: lower water demand, more cohesive mix, less tendency for water to segregate and bleed and enhanced resistance of hardened concrete or mortar to freeze/thaw attack. Mastercrete is also 39% better for the environment. Comes in a convenient weatherproof plastic bag.
Sulfacrete is particularly suitable for reducing damage to concrete, mortar and grout exposed to sulphate attack and minimising the risk of alkali silica reaction, reducing the thermally-induced stresses in large pours, concrete exposed to the marine environment. Sulfacrete is a low-alkali Portland-fly ash cement that conforms to the requirements of BS EN 197-1 CEM II/B-V 32,5R. This cement is classified by BS 8500 with a +SR suffix, signifying enhanced sulphate resistance.
A Portland cement containing calcium aluminate to Extra Rapid gives rapid hardening and setting properties for repair and maintenance where rapid hardening is required, eg, setting manholes, repairs to paths and steps, Suitable for concrete, mortar, rendering and floor screeds. Extra Rapid takes foot traffic in 4-6 hours and vehicular traffic in 8-12 hours.
Sovereign Hey’di Barrier Mortar is a hydrophobic, non-shrinking repair mortar. It is an integral part of the Sovereign Hey’di K11 tanking system, used to create a fillet at wall/wall and wall/floor junctures. Hey’di Barrier Mortar forms a water-resistant mortar that does not shrink, and has excellent adhesion to concrete and mortar. It can be used as a general repair mortar where shrinkage needs to be avoided. Hey’di Barrier Mortar has a long pot life of up to 5 hours, ensuring that waste is kept to a minimum.
Mastercrete contains cement quality improver to give the following benefits compared with ordinary Portland cement: lower water demand, more cohesive mix, less tendency for water to segregate and bleed and enhanced resistance of hardened concrete or mortar to freeze/thaw attack. Mastercrete is also 39% better for the environment. Comes in a convenient weatherproof plastic bag.