Suitable for
Ideal for general filling and insulating of holes, voids, gaps and joints in most construction applications. Adheres to most building materials. Can also be used around window and door frames. Insulation of pipes etc.
Interior or Exterior Use
Interior
Application Method
Shake the aerosol can for at least 20 seconds. Put the adapter on the valve. Moisten surfaces with a water sprayer prior to application. For nonconventional substrates a preliminary adhesion test is recommended. Remove pressure from the applicator to stop. Fill holes and cavities for 1/3, as
the foam will expand. Repeat shaking regularly during application. If you have to work in layers repeat moistening after each layer. Fresh foam can be
removed using Soudal Gun & Foamcleaner. Prior to using the Gun & Foamcleaner, test whether surfaces are affected or not. Especially plastics and
lacquer or paint layers can be sensitive to this. Cured foam can onlybe removed mechanically or with Soudal PU-Remover.
Time to Full Cure
55 minutes
Standards Met
EN 17333-1 / EN-17333-2 / EN 17333-3 / EN 17333-4 / EN 17333-5
Certifications Met
EN ISO 717-1
Manufacturer Model No
Soudal