Sika®-2 Water Plug is a ready to use very rapid setting leak stopping liquid which is mixed with ordinary portland cement to produce a paste for immediate leak sealing against high water pressure infiltration.
Discreet and secure, the Ei1020 Environmental Sensor can be placed throughout a property to monitor temperature and humidity, providing actionable insights to enable the creation of healthier, safer homes."
Sika 4a Waterstop is a rapid setting, ready to use waterproofing admixture which can be used to produce a paste for leak stopping against low to moderate water pressure infiltration when mixed with water and ordinary Portland cement.
RLT BACTDET 05 is the first stage of MGC's Mould Eradication Treatment and used for killing and removing mould from contaminated surfaces. The product is soapy in consistency and supplied in concentrated form in 1 and 5 litre containers which should be diluted at 1:4 with warm or cold water. Apply the diluted product by brush, cloth or sponge to the infected surfaces extending the treatment 1 metre beyond visible signs of mould removing as much of the contamination as possible. This stage of the treatment will kill the mould, stop it spreading to other areas and clean the surfaces.
Size
5 L
Suitable for
Amateur and Professional first stage treatment for the long term eradication of mould contamination to interior walls and ceilings
Interior or Exterior Use
Interior use
Container Type
Plastic jerry can
Application Method
Cloth, sponge or brush
Type
Concentrate
Pack Quantity
1
Certifications Met
Approved under C.O.P.R.1986 (as amended) by the Health and Safety Executive Registration No 8144
Sika®-2 Water Plug is a ready to use very rapid setting leak stopping liquid which is mixed with ordinary portland cement to produce a paste for immediate leak sealing against high water pressure infiltration.
Discreet and secure, the Ei1020 Environmental Sensor can be placed throughout a property to monitor temperature and humidity, providing actionable insights to enable the creation of healthier, safer homes."
Sika 4a Waterstop is a rapid setting, ready to use waterproofing admixture which can be used to produce a paste for leak stopping against low to moderate water pressure infiltration when mixed with water and ordinary Portland cement.
RLT BACTDET 05 is the first stage of MGC's Mould Eradication Treatment and used for killing and removing mould from contaminated surfaces. The product is soapy in consistency and supplied in concentrated form in 1 and 5 litre containers which should be diluted at 1:4 with warm or cold water. Apply the diluted product by brush, cloth or sponge to the infected surfaces extending the treatment 1 metre beyond visible signs of mould removing as much of the contamination as possible. This stage of the treatment will kill the mould, stop it spreading to other areas and clean the surfaces.