Sovereign CDM3 Lath/Mesh Membrane provides a robust drainage membrane suitable for use above and below ground on walls, floors and arched/vaulted ceilings, as part of the SovDrain waterproofing system. This membrane has a low stud profile (3mm), thus minimising wall and floor level changes.
The NDC Polipak DPC 225mm x 30m Damp Proof Course is produced from 100% recycled polythene and meets the standards set forth in BS 6515 (1984). Additionally, it is CE marked in accordance with EN14909 (2012). This product is appropriate for application in brick, stone, and concrete walls. The Damplas DPC is designed to provide a robust damp proof barrier that effectively prevents moisture ingress within structural walls.
Drybase Plaster Mesh Membrane LP is produced using high-quality Polypropylene material and provides a barrier to moisture, salts and vapour. It is a slimline membrane with 2.5mm studs on the rear that enables the management of moisture without significantly reducing room space. A plastic mesh is welded to the front surface of the membrane, allowing it to accept plaster coats via standard trowel application or as a base for dot and dab plasterboard application.
Sovereign SovDrain CDM 20 is a high performance cavity drainage system membrane. It provides a robust drainage membrane suitable for use on floors, as part of the SovDrain Waterproofing system. SovDrain CDM 20 is easily cut to shape/size using a knife or scissors. This membrane is typically finished with either a Sovereign SBR Bonding Agent modified screed (minimum 65mm) or a floating floor.
Sovereign CDM3 Lath/Mesh Membrane provides a robust drainage membrane suitable for use above and below ground on walls, floors and arched/vaulted ceilings, as part of the SovDrain waterproofing system. This membrane has a low stud profile (3mm), thus minimising wall and floor level changes.
The NDC Polipak DPC 225mm x 30m Damp Proof Course is produced from 100% recycled polythene and meets the standards set forth in BS 6515 (1984). Additionally, it is CE marked in accordance with EN14909 (2012). This product is appropriate for application in brick, stone, and concrete walls. The Damplas DPC is designed to provide a robust damp proof barrier that effectively prevents moisture ingress within structural walls.
Drybase Plaster Mesh Membrane LP is produced using high-quality Polypropylene material and provides a barrier to moisture, salts and vapour. It is a slimline membrane with 2.5mm studs on the rear that enables the management of moisture without significantly reducing room space. A plastic mesh is welded to the front surface of the membrane, allowing it to accept plaster coats via standard trowel application or as a base for dot and dab plasterboard application.
Sovereign SovDrain CDM 20 is a high performance cavity drainage system membrane. It provides a robust drainage membrane suitable for use on floors, as part of the SovDrain Waterproofing system. SovDrain CDM 20 is easily cut to shape/size using a knife or scissors. This membrane is typically finished with either a Sovereign SBR Bonding Agent modified screed (minimum 65mm) or a floating floor.