Free Click & Collect
Within One Hour
Delivery address
Collection branch
Ideas & Advice
VAT
EX
INC
Wykamol CMPLASTERPLUG100 Plaster Plugs with Seals White Pack 100
Hover Over to Zoom In
Overview
- Wykamol CM Plaster Plugs are used for the application of Wykamol Mesh membrane Systems.
- A reinforced head to prevent damage when knocking in the plug.
- Tailor made seal specific to each plug
- Large serrated heads (35mm brick plug or 50mm plaster plugs) provides optimum surface area and adhesion to finishes
Technical specification
Country Origin
GB
Brand Name
Wykamol
Reviews
Be the first to review this product.
NEW
Drybase Plaster Mesh Membrane LP is produced using high-quality Polypropylene material and provides a barrier to moisture, salts and vapour. It is a slimline membrane with 2.5mm studs on the rear that enables the management of moisture without significantly reducing room space. A plastic mesh is welded to the front surface of the membrane, allowing it to accept plaster coats via standard trowel application or as a base for dot and dab plasterboard application.
£488.51 each (Inc. VAT)
NEW
Sovereign CDM8 Membrane Lath Plugs are manufactured from polypropylene, giving a corrosion resistant fixing. They are intended for use in damp proofing and waterproofing applications, to secure SovDrain lath membranes to the substrate, as part of the SovDrain waterproofing system.
£31.50 each (Inc. VAT)
NEW
Sovereign Membrane Plugs are manufactured from glass filled polyamide, giving a high strength and corrosion resistant fixing. They are intended for use in damp proofing and waterproofing applications, to secure SovDrain membranes to the substrate, as part of the SovDrain waterproofing system. The plugs must be sealed using SovDrain Sealing Rope to the underside of the plug head in all below ground applications. Sovereign CDM8 plugs can be used in above ground situations, which includes a rubber sealing washer already installed onto the plug.
£77.40 each (Inc. VAT)
NEW
Sovereign CDM8 Rapid Seal Plugs and Washers are manufactured from polypropylene giving a corrosion resistant fixing. The two-piece plug comprises of an expansion pin and fixing body for fixing through insulation into a solid substrate and into COB wall construction, as part of the SovDrain waterproofing system.
£73.80 each (Inc. VAT)