Drybase Plaster Mesh Membrane LP is produced using high-quality Polypropylene material and provides a barrier to moisture, salts and vapour. It is a slimline membrane with 2.5mm studs on the rear that enables the management of moisture without significantly reducing room space. A plastic mesh is welded to the front surface of the membrane, allowing it to accept plaster coats via standard trowel application or as a base for dot and dab plasterboard application.
Dryzone is a special damp proofing cream that is introduced along the mortar course at regular intervals by injecting it into pre-drilled holes. The Dryzone then diffuses before curing to form a continuous water repellent barrier. This prevents the damp from rising up the wall. BBA approved.
Fleece backed 100 mm waterproof butyl tape gives a well-bonded seal to the mesh face of Drybase. Plaster Membrane. The fleece backing to this tape also accepts a plaster coat finish as well as plaster adhesive where a dot and dab plasterboard system is preferred.
DuPont Tyvek UV Facade Membrane is the next generation in lightweight advanced protective membranes. Its proven track record of exceptional moisture management, high vapour permeability and durability makes it the superior protection solution for rainscreen cladding. Tyvek UV Facade is water resistant, vapour-permeable and windtight, and designed for long-term performance, coming with a 10-year product warranty from DuPont for joint widths of up to 3cm.
Drybase Plaster Mesh Membrane LP is produced using high-quality Polypropylene material and provides a barrier to moisture, salts and vapour. It is a slimline membrane with 2.5mm studs on the rear that enables the management of moisture without significantly reducing room space. A plastic mesh is welded to the front surface of the membrane, allowing it to accept plaster coats via standard trowel application or as a base for dot and dab plasterboard application.
Dryzone is a special damp proofing cream that is introduced along the mortar course at regular intervals by injecting it into pre-drilled holes. The Dryzone then diffuses before curing to form a continuous water repellent barrier. This prevents the damp from rising up the wall. BBA approved.
Fleece backed 100 mm waterproof butyl tape gives a well-bonded seal to the mesh face of Drybase. Plaster Membrane. The fleece backing to this tape also accepts a plaster coat finish as well as plaster adhesive where a dot and dab plasterboard system is preferred.
DuPont Tyvek UV Facade Membrane is the next generation in lightweight advanced protective membranes. Its proven track record of exceptional moisture management, high vapour permeability and durability makes it the superior protection solution for rainscreen cladding. Tyvek UV Facade is water resistant, vapour-permeable and windtight, and designed for long-term performance, coming with a 10-year product warranty from DuPont for joint widths of up to 3cm.